YME Engineering Course

K. DEFINING HIS FUNCTION
Eddss
E: Identifier indicating that the bus type is Ethernet (fixed)
dd: Domain number specified when HIS was created
ss: Station number specified when HIS was created
♦ ETHERNET IP ADDRESS
Ethernet IP addresses are used to logically identify the HIS connected to
the Ethernet. The Ethernet IP addresses are automatically determined
according to the bus type, domain number and station number. In normal
situations, the automatically determined setting should be used.
172.17.dd. ss : Ethernet IP address
172: System fixed
17: Identifier showing that the bus type is Ethernet (fixed)
dd: Domain number specified during HIS creation (*2)
ss: Station number specified during the HIS creation
♦ ETHERNET SUBNET MASK
The Ethernet subnet mask is set to “255.255.0.0” by default. Normally, this
default setting should be used.
K.2. HIS CONSTANTS BUILDER
Double click on the OpeconDef in the HIS configuration folder
Figure: HIS Constants builder dialog.
YME Training Center
K-4
CS3KR3-ENG 1 ST Edition Jan 2002