YME Engineering Course

More documents

Recommendations

Info

T. PROJECT COMMON DEFINITIONmedium-priority alarm designated for bit position 8, a high-priority alarm cannotbe designated for bit positions 9 to 32.♦ ColorChoose from 16 colors corresponding to the alarm.♦ PriorityDesignate the alarm priority.The system-fixed alarm status character string itself cannot be changed, but itscolor and priority can be changed. For example, the PID controller block assigns“HI” to bit position 17. By default this will be processed as a medium-priorityalarm upon its occurrence, and displayed in red. To change the above mediumpriorityalarm to the high-priority alarm and display “HI” in magenta, do thefollowing:♦ To change it to the high-priority alarm, use the Alarm Priority Builder. Notethat changes made here will be effective for high-priority alarms of otherfunction blocks.♦ In the Alarm Processing Table Builder, select the field for alarmprocessing level No.5 for bit position 17, and then select [M: Magenta] for[Color (5)], and [1: High-priority Alarm] for [Priority (5)]. (The color and thepriority can be changed for any of alarm processing level Nos. 5 to 16.)Figure: Designation in the Alarm Processing Table Builder♦ Select the [Alarm] tab in the Function Block Detail Builder, and then select[5: User defined Alarm Process (5)] at [Alarm Processing Level].YME Training CenterT-6CS3KR3-ENG 1 ST Edition Jan 2002
T. PROJECT COMMON DEFINITIONT.4. USER DEFINED STATUS CHARACTER STRING BUILDERWhen there is no block status connection, the block status strings defined on theuser-defined Status Character String Builder unique to the faceplate block can beused. The default status strings for faceplate blocks are shown in the tablebelow.Figure: User defined status character string builder.YME Training CenterT-7CS3KR3-ENG 1 ST Edition Jan 2002
Page 1 and 2:
Yokogawa Middle East Training Cente
Page 3 and 4:
TABLE OF CONTENTSD.4. Engineering f
Page 5 and 6:
TABLE OF CONTENTSJ.3.1 CONFIGURATIO
Page 7 and 8:
TABLE OF CONTENTSP.4.4 DATA TYPE P-
Page 9 and 10:
TABLE OF CONTENTST.7.2 How to Defin
Page 11 and 12:
WELCOME TO YME TRAINING CENTERCours
Page 13 and 14:
A. INTRODUCTION TO PROCESS CONTROL
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
B. SYSTEM OVERVIEWB. SYSTEM OVERVIE
Page 21 and 22:
B. SYSTEM OVERVIEW♦ Safety Contro
Page 23 and 24:
B. SYSTEM OVERVIEWB.3. HUMAN INTERF
Page 25 and 26:
B. SYSTEM OVERVIEWB.4. FIELD CONTRO
Page 27 and 28:
B. SYSTEM OVERVIEW♦ LFCS - Standa
Page 29 and 30:
B. SYSTEM OVERVIEWFigure: PFCD - Co
Page 31 and 32:
B. SYSTEM OVERVIEW♦ NodeNode cons
Page 33 and 34:
B. SYSTEM OVERVIEWB.5. NETWORKCS300
Page 35 and 36:
B. SYSTEM OVERVIEWB.8. LABORATORY E
Page 37 and 38:
C. HIS STARTUPFigure : HIS Utility
Page 39 and 40:
C. HIS STARTUPFigure: To start the
Page 41 and 42:
C. HIS STARTUPFigure: Virtual HIS O
Page 43 and 44:
E. PROJECT CREATIOND. ENGINEERING E
Page 45 and 46:
E. PROJECT CREATIOND.4. ENGINEERING
Page 47 and 48:
E. PROJECT CREATIONE. PROJECT CREAT
Page 49 and 50:
E. PROJECT CREATION♦ Confirm defa
Page 51 and 52:
E. PROJECT CREATION♦ Creating FCS
Page 53 and 54:
E. PROJECT CREATIONE.3. PROJECT ATT
Page 55 and 56:
F. DEFINING FCS CONFIGURATIONF. DEF
Page 57 and 58:
F. DEFINING FCS CONFIGURATIONThe mo
Page 59 and 60:
F. DEFINING FCS CONFIGURATIONidenti
Page 61 and 62:
F. DEFINING FCS CONFIGURATION♦ St
Page 63 and 64:
F. DEFINING FCS CONFIGURATIONcharac
Page 65 and 66:
G. PROCESS INPUT/OUTPUTSG. PROCESS
Page 67 and 68:
G. PROCESS INPUT/OUTPUTSFigure: New
Page 69 and 70:
G. PROCESS INPUT/OUTPUTSFigure: Cre
Page 71 and 72:
G. PROCESS INPUT/OUTPUTSFigure: Typ
Page 73 and 74:
G. PROCESS INPUT/OUTPUTSname Dup) c
Page 75 and 76:
G. PROCESS INPUT/OUTPUTS♦ OOP Cle
Page 77 and 78:
G. PROCESS INPUT/OUTPUTS♦ Service
Page 79 and 80:
H. CONTROL DRAWING BUILDERH. CONTRO
Page 81 and 82:
H. CONTROL DRAWING BUILDERThe icons
Page 83 and 84:
H. CONTROL DRAWING BUILDERAutomatic
Page 85 and 86:
I. REGULATORY CONTROL FUNCTION BLOC
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
J. SEQUENCE CONTROL FUNCTIONJ. SEQU
Page 109 and 110:
J. SEQUENCE CONTROL FUNCTIONFigure
Page 111 and 112:
J. SEQUENCE CONTROL FUNCTIONtext fo
Page 113 and 114:
J. SEQUENCE CONTROL FUNCTIONFigure:
Page 115 and 116:
J. SEQUENCE CONTROL FUNCTIONJ.3.1 C
Page 117 and 118:
Page 119 and 120:
J. SEQUENCE CONTROL FUNCTIONFigure
Page 121 and 122:
J. SEQUENCE CONTROL FUNCTION♦ CMP
Page 123 and 124:
J. SEQUENCE CONTROL FUNCTIONJ.4.2 C
Page 125 and 126:
Page 127 and 128:
J. SEQUENCE CONTROL FUNCTIONwhich i
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
J. SEQUENCE CONTROL FUNCTIONJ.5. LA
Page 137 and 138:
K. DEFINING HIS FUNCTION♦ YPCKIT
Page 139 and 140:
K. DEFINING HIS FUNCTIONEddssE: Ide
Page 141 and 142:
K. DEFINING HIS FUNCTIONK.2.2 USER
Page 143 and 144:
K. DEFINING HIS FUNCTION♦ Long-Te
Page 145 and 146:
K. DEFINING HIS FUNCTION• Acknowl
Page 147 and 148:
K. DEFINING HIS FUNCTIONK.3. LABORA
Page 149 and 150:
L. FUNCTION KEYSL.2. LED FLASHING C
Page 151 and 152:
L. FUNCTION KEYSL.2.3 SYSTEM FUNCTI
Page 153 and 154:
L. FUNCTION KEYSCalls up the Messag
Page 155 and 156:
L. FUNCTION KEYSL.3. LABORATORY EXE
Page 157 and 158:
M. SCHEDULER-: Not valid even when
Page 159 and 160:
N. PANEL SETN. PANEL SETUp to 200 P
Page 161 and 162:
N. PANEL SETN.4. LABORATORY EXERCIS
Page 163 and 164:
O. SEQUENCE MESSAGE REQUESTO.1. SPE
Page 165 and 166:
P. TREND DEFINITIONP. TREND DEFINIT
Page 167 and 168:
P. TREND DEFINITIONP.3. DEFINING TR
Page 169 and 170:
P. TREND DEFINITIONP.3.2 SAMPLING P
Page 171 and 172:
P. TREND DEFINITIONother consoles a
Page 173 and 174:
P. TREND DEFINITIONP.5. LABORATORY
Page 175 and 176:
Q. HIS WINDOW CONFIGURATION♦ Grap
Page 177 and 178:
Q. HIS WINDOW CONFIGURATIONQ.2. SET
Page 179 and 180:
Q. HIS WINDOW CONFIGURATIONFigure:
Page 181 and 182:
Q. HIS WINDOW CONFIGURATION♦ Inst
Page 183 and 184: Q. HIS WINDOW CONFIGURATION♦ Type
Page 185 and 186: Q. HIS WINDOW CONFIGURATION• Call
Page 187 and 188: Q. HIS WINDOW CONFIGURATIONQ.5. LAB
Page 189 and 190: R. USER DEFINED HELP WINDOW DEFINIT
Page 191 and 192: S. GRAPHIC BUILDERS. GRAPHIC BUILDE
Page 193 and 194: S. GRAPHIC BUILDERS.3. RECOMMENDED
Page 195 and 196: S. GRAPHIC BUILDERS.4.3 GRAPHIC BUI
Page 197 and 198: S. GRAPHIC BUILDERS.4.5 GRAPHIC BUI
Page 199 and 200: S. GRAPHIC BUILDERS.4.10 GRAPHIC BU
Page 203 and 204: S. GRAPHIC BUILDERTable: HIS Functi
Page 207 and 208: S. GRAPHIC BUILDER♦ Attribute tab
Page 209 and 210: S. GRAPHIC BUILDER♦ Data Bind tab
Page 211 and 212: S. GRAPHIC BUILDERFigure: Generic N
Page 213 and 214: S. GRAPHIC BUILDER• Set Default G
Page 215 and 216: S. GRAPHIC BUILDER♦ Draw Property
Page 217 and 218: S. GRAPHIC BUILDER• Select [Selec
Page 219 and 220: S. GRAPHIC BUILDERFigure: Change in
Page 221 and 222: S. GRAPHIC BUILDER♦ When importin
Page 223 and 224: S. GRAPHIC BUILDERS.5.4 BLINKINGThi
Page 225 and 226: S. GRAPHIC BUILDERS.5.10 GRAPHIC MO
Page 227 and 228: S. GRAPHIC BUILDERUnitName.CommonBl
Page 229 and 230: T. PROJECT COMMON DEFINITIONT. PROJ
Page 231 and 232: T. PROJECT COMMON DEFINITIONFigure:
Page 233: T. PROJECT COMMON DEFINITIONT.3. AL
Page 237 and 238: T. PROJECT COMMON DEFINITIONFigure:
Page 239 and 240: T. PROJECT COMMON DEFINITIONThe fol
Page 241 and 242: T. PROJECT COMMON DEFINITIONT.7.1 S
Page 243 and 244: T. PROJECT COMMON DEFINITIONin the
Page 245 and 246: T. PROJECT COMMON DEFINITION♦ Ali
Page 247 and 248: T. PROJECT COMMON DEFINITIONTable:
Page 251 and 252: T. PROJECT COMMON DEFINITIONT.12.3
Page 255 and 256: T. PROJECT COMMON DEFINITIONSpecify
Page 257 and 258: T. PROJECT COMMON DEFINITIONY: Oper
Page 259 and 260: T. PROJECT COMMON DEFINITIONT.13.13
Page 261 and 262: U. NOTESU. NOTESYME Training Center
Page 263 and 264: U. NOTESYME Training CenterU-3CS3KR
show all

YME Engineering Course

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?