YME Engineering Course

S. GRAPHIC BUILDER
♦ Modifying the objects
To add, move or delete the point of an object, use the point modification
tool.
• Point Correction
To use the point modification tool, perform one of the following
operations after selecting an object.
• Select [Edit Point] from the [Edit] menu.
• Select [Point Correction] button from the draw tool bar.
• Select [Edit Point] from the pop-up menu displayed by
clicking the right mouse button after selecting an object.
• Double-click the object. (Only when the double-click
operation is specified to “Start Change Processing” via the
[Options] Dialog box called up from the [Tools] menu.)
Perform one of the above operations, to edit the object by
selecting the points of an object. At this time, the handles
change as follows.
Figure: Change in the Handles
When the cursor is positioned over the handle, it changes the shape as shown in
the figure below, enabling the handle to be selected.
Figure: Change in the Shape of Cursor
S.4.19 PROCESS DATA CHARACTER DISPLAY TOOL
Select [Data Display]-[Process Data-Character] from the [Insert] menu or
[Process Data- Character] button on the HIS functions tool bar to change the
cursor shape as shown below. Similarly all the other graphic builder tools are
used.
YME Training Center
S-28
CS3KR3-ENG 1 ST Edition Jan 2002