28.04.2020 Views

YME Engineering Course

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

L. FUNCTION KEYS

Calls up the Message Monitor window. When a message occurs, the LED

in a function key that has been assigned the function of calling up the

Message Monitor window turns on. The LED turns off after the message is

acknowledged. The LED cannot be assigned to a function key that has

been assigned the function of calling up the Message Monitor window.

♦ Window Shift (SHFT)

Shifts the windows displayed in main monitor to sub monitor. When using

this function, the display in the sub monitor is replaced by the display in

the main monitor. The display in main monitor becomes empty after

Window Shift operation. After running this function, the windows shifted

from main monitor to sub monitor may not be displayed in the same

cascade sequence. This Window Shift function is valid only when the

package for multiple monitors is installed. If the package for multiple

monitors is not installed, an error beep can be heard when operating this

function.

♦ Window Exchange (ECHG)

Exchanges the displays of main monitor and sub monitor.

After running this function, the windows shifted from main monitor to sub

monitor or vice versa may not be displayed in the same cascade

sequence. This Window Exchange function is valid only when the package

for multiple monitors is installed. If the package for multiple monitors is not

installed, an error beep can be heard when operating this function.

L.2.4 EXAMPLE OF ASSIGNING THE SYSTEM FUNCTION KEY

A system function key is assigned using the format given below:

K∆system function key name

∆: Space

Example : K∆USIN

In the above example, the User-In dialog box is called.

L.2.5 DEFINITIONS FOR ASSIGNING LED TO A FUNCTION KEY

When assigning a function to control the flashing and turning ON/OFF of LED’s

to the function keys, define the following items using the Function Key

Assignment Builder:

♦ LED number

♦ Parameter

♦ LED Number

This is the number for the LED to be controlled. Select between 1 and 32.

♦ LED Parameter

YME Training Center

L-6

CS3KR3-ENG 1 ST Edition Jan 2002

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!