YME Engineering Course

G. PROCESS INPUT/OUTPUTS
Figure: New FIO node dialog box
♦ Type
Two selections, Local and Remote, are available for Type. Specify the
type of a node to be created. To create a remote node, it is necessary to
define an EB401 (ER bus interface master module) for a local node to
which that remote node is to be connected in advance.
♦ Node Number
The node number is used to identify a node unit. Specify a node number
between 1 and 10. The default node number is 1. A maximum of 10 local
nodes, a maximum of eight remote nodes, and a total of 10 local and
remote notes when they are mixed can be connected. Also, a maximum of
four ER buses can be connected to each KFCS2/KFCS.
YME Training Center
G-3
CS3KR3-ENG 1 ST Edition Jan 2002