YME Engineering Course

G. PROCESS INPUT/OUTPUTS
name Dup) cannot be modified. The property sheet and the contents in
the property sheet cannot be accessed. When the original IOM is
modified, the same modification will be automatically duplicated to the
duplicated IOM (sIOM name Dup).
♦ Output Type
Output type can be specified to the analog input/output modules and
analog output modules. Different output type makes the output to the
modules or to the EB401 at different timings.
Output in a lump: Output when all highest scan function blocks in the
FCS complete their processing.
Output immediately: Output when the connected function block is
performing output process.
♦ High Speed Read
When check the option box [High Speed Read], CPU reads the data at
high speed from the I/O module. However, the I/O modules for
communication with remote nodes, and the I/O modules for Fieldbus
communication, High Speed read option are not available.
♦ IOM Comment
Up to 24 alphanumeric characters or up to 12 double-byte characters can
be put as IOM comment text. The IOM comment can be omitted. There is
not comment text by default.
YME Training Center
G-9
CS3KR3-ENG 1 ST Edition Jan 2002