YME Engineering Course

S. GRAPHIC BUILDER
The generic name set data is written as follows:
Figure: Writing Generic Name Set Data
• Generic Name
The graphic generic name selected in the list view will be displayed.
The selected graphic generic name can be changed, except for the
generic name of the system-specific window and the generic name
of the object whose property sheet is defined with [Set an Individual
Generic]. When a graphic generic name is changed, whether the
new name is defined within 16 alphanumeric characters including
underscore ( _ ) and hyphen (-) and whether it begins with “$” are
checked. When the setting for the graphic generic name is
changed, the setting for corresponding objects will be changed
automatically.
• Binding of Graphic Generic Name
The binding of the graphic generic name selected in list view can
be defined except for the generic name of the system-specific
window and the generic name of the object whose properties sheet
is defined with [Set an Individual Generic].
The length of the graphic generic name will be checked for not
exceeding 200 bytes. One generic name can be bound with
different variants in accordance with different graphic generic name
sets.
YME Training Center
S-22
CS3KR3-ENG 1 ST Edition Jan 2002