YME Engineering Course

Q. HIS WINDOW CONFIGURATION
♦ Graphic Window with Overview Attribute
The Graphic window with overview attribute is used to display the status of
the function blocks and to call various operation and monitoring windows
can be assigned to the Graphic window with overview attribute. The
overall status of the plant can be grasped at a glance. Control group with
8 loops or 16 loops or 8 loops for console type can be assigned.
♦ Graphic Window with Control Attribute
The Graphic window with control attribute is used to assign the instrument
faceplate in the Graphic window with control attribute. So user can operate
the plant while viewing the graphic image of it.
♦ Trend Window
The Trend window displays acquired trend data. The trend data to be
displayed in the Trend window is defined in the System View and Trend
Acquisition Pen Assignment Builder. The assignment of the trend
acquisition pen defined in the Trend Acquisition Pen Assignment Builder
can be changed in the Trend window. From the Trend window, user can
call up a Trend Point window that displays one of the eight process data
assigned to the Trend window. A Trend Point window is automatically
created when process data is assigned to the Trend window. There is no
need to specify the window type for the Trend window since there are files
available for them.
♦ Help Dialog Name
In the Help dialog box, system-fixed help message and user-defined
message can be displayed. When user defines a help message, the
definition is made in the Help Message Builder. The maximum length of
the definable message is 21 lines 70 single-byte alphanumeric characters
or 35 double-byte characters. The Help dialog box may be used in
combination with a Graphic window, a Trend window or a Tuning window.
For instance, user can define a help message for operation procedure and
outline of a Graphic window. This message can be called up by pushing
the help button when the Graphic window is being displayed.
♦ Shortcut Window
HIS can create a shortcut window in the window hierarchy of the userdefined
window in itself. When the shortcut linked window is modified, all
the shortcut windows are automatically modified (the modification
becomes valid when the window is called up again). If there is shared
equipment, it is useful for creating the same window in the multiple
hierarchy. However, the shortcut window can be created in only one
hierarchy. The shortcut of the shortcut window cannot be created.
Shortcut window is a kind of user-defined windows. Its window type is
dependent on the window type of the shortcut linked window. The
YME Training Center
Q-2
CS3KR3-ENG 1 ST Edition Jan 2002