YME Engineering Course

T. PROJECT COMMON DEFINITION
The following characters cannot be used for the equipment name.
• , (comma)
• @ (at mark)
• * (asterisk)
• : (colon)
• ∆ Single-byte space
T.6. ENGINEERING UNIT SYMBOL BUILDER
The engineering unit symbol is a unit symbol attached to a data value including
flow rate and pressure, and is used on all the projects. Up to 256 engineering unit
symbols can be used for one project. One engineering unit symbol can be
defined with up to six alphanumeric characters or three double-byte characters.
Figure: Engineering unit symbol builder
T.6.1 SETTING THE AUTO OR MANUAL MODE
The engineering unit symbol can be set either automatically or manually.
YME Training Center
T-11
CS3KR3-ENG 1 ST Edition Jan 2002