chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

CHEMKOR SCHEDULE 40 GRAY FITTINGS
SOCKET TEES
90° SOCKET
ELBOWS
45° SOCKET
ELBOWS
SOCKET
COUPLINGS
FEMALE
ADAPTERS
MALE
ADAPTERS
FITTING
ADAPTER
SPGT X FPT SOCKET CAPS
45° SOCKET
LATERALS
NOMINAL
PIPE
SIZE
1/4
3/8 406003
1/2 401005 406005 417005 429005 435005 436005 478005 447005
3/4 401007 406007 417007 429007 435007 436007 478007 447007
1 401010 406010 417010 429010 435010 436010 478010 447010
1 1/4 401012 406012 417012 429012 435012 436012 478012 447012
1 1/2 401015 406015 417015 429015 435015 436015 478015 447015
2 401020 406020 417020 429020 435020 436020 478020 447020
2 1/2 401025 406025 417025 429025 435025 436025 478025 447025
3 401030 406030 417030 429030 435030 436030 478030 447030
4 401040 406040 417040 429040 435040 436040 478040 447040
5 401050 406050 417050 429050 435050 436050 447050
6 401060 406060 417060 429060 436060 447060
8 401080W 406080W 417080W 429080W 436080W 447080W
10 401100F 406100F 417100 429100F 447100F 475100F
12 401120F 406120F 417120 829120F 447120F 475120F
14 401140F 406140F 417140F 429140F 447140F 475140F
16 401160F 406160F 417160F 429160F 447160F 475160F
18 401180F 406180F 417180F 429180F 447180F 475180F
20 401200F 406200F 417200F 429200F 447200F 475200F
24 401240F 406240F 417240F 429240F 447240F 475240F
Notes:
• PVC Schedule 40 Fittings are produced in accordance with the following standards – ASTM D1784, ASTM D2466.
• All 8” fi ttings available in white PVC material only. All Schedule 40 reducing tees are standard tees with a reducer bushing.
• PVC Schedule 40 Fittings are produced in accordance with the following standards ASTM D1784, ASTM D2466.
• The maximum continuous working pressure of the fi ttings is equal to 150 PSI at 73.4 °F (23 °C). No provisions have been made for pressure surges, water hammer, or
other conditions which should be considered.
• All custom fabricated fi ttings are not subject to return. Many other fi ttings are available on request.
• F indicates a fabricated fi tting. Some fabricated fi ttings may be fi berglass reinforced. (F) indicates fi tting is available molded or fabricated.
1-7
1