chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

1
1-18
NOMINAL
PIPE
SIZE
CHEMKOR SCHEDULE 80 CPVC FITTINGS
SOCKET
COUPLINGS
THREADED
COUPLINGS
THREADED
PLUGS
SOCKET
UNIONS
(EPDM
O-RINGS)
SOCKET
UNIONS
(VITON
O-RINGS)
THREADED
UNIONS
(VITON
O-RINGS)
THREADED
UNIONS
(EPDM
O-RINGS)
HEAVY
DUTY
WYES
1/4 529002 530002 550002 597002 557002 558002 598002
3/8 529003 530003 550003 597003 557003 558003 598003
1/2 529005 530005 550005 597005 557005 558005 598005 575005
3/4 529007 530007 550007 597007 557007 558007 598007 575007
1 529010 530010 550010 597010 557010 558010 598010 575010
1 1/4 529012 530012 550012 597012 557012 558012 598012 575012
1 1/2 529015 530015 550015 597015 557015 558015 598015 575015
2 529020 530020 550020 597020 557020 558020 598020 575020
2 1/2 529025 530025 550025 597025 557025 558025 598025
3 529030 530030 550030 597030 557030 558030 598030
4 529040 530040 550040 597040 557040 558040 598040
5 529050
6 529060 530060F 550060F 597060 557060 558060 598060
8 529080
10 529100
12 529120
14 529140(F)
16 529160F
18 529180F
20 529200F
24 529240F
SOCKET
REDUCING
TEES
NOMINAL
PIPE
SIZE
3/4 x 3/4 x 1/2 501101
1 x 1 x 1/2 501130
1 x 1 x 3/4 501131
1 1/2 x 1 1/2 x 3/4 501210
1 1/2 x 1 1/2 x 1 501211
2 x 2 x 1/2 501247
2 x 2 x 3/4 501248
2 x 2 x 1 501249
2 x 2 x 1 1/2 501251
3 x 3 x 2 501338
4 x 4 x 2 501420
4 x 4 x 3 501422
6 x 6 x 4 501532
10 x 10 x 6 501626F
10 x 10 x 8 501628F
12 x 12 x 8 501668F
12 x 12 x 10 501670F
Notes:
• CPVC SCH 80 fi ttings are produced in accordance with the following standards: ASTM D1784, ASTM F-439 (socket fi ttings), ASTM F-437 (threaded fi ttings).
• Flanges are 150 lb. ANSI B.16.5 dimensioned.
• Heavy duty wyes are produced from CPVC according to ASTM D1784, Cell Class 23447B and are pressure rated to 217 PSI.
• Fabricated fi ttings, custom manufactured and/or modifi ed FABCO products (FRP products, machined products, modifi ed standard products, etc.) and are not subject to
return or cancellation.
• Many other fi ttings are available on request. Some Schedule 40 reducing tees are standard tees with a reducer bushing.
• The maximum continuous working pressure of the fi ttings is equal to 150 PSI at 73.4°F(23°C). No provisions have been
made for pressure surges, water hammer, or other conditions which should be considered.
• All custom fabricated fi ttings are not subject to return. Many other fi ttings are available on request.
• “F” indicates a fabricated fi tting. Some fabricated fi ttings may be fi berglass reinforced. (F) indicates fi tting is available moulded or fabricated.