chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

5
5-16
FLOWLINE ECHOSPAN
This general purpose two-wire ultrasonic transmitter provides non-contact level measurement
up to 32’ or 10m, and is ideally suited for challenging ultrapure, corrosive or
waste liquids. Push button calibrated, the transmitter is broadly selected for atmospheric
bulk storage, day tank and waste sump applications. Media examples include wastewater
and sodium hydroxide. Setup is fast and simple with push button calibration and LCD
display. Features include three measurement ranges up to 10m, 2” transducer, 6-segment
LCD display indicating level in inch or centimeter values, 7.6 cm minimum beam width
for applications with restricted space, selectable display indicating level in air gap or
liquid height, and PVC/ABS enclosure rated NEMA 4X with rugged PVDF transducer.
It is available with either metric or imperial mounting thread.
FLOWLINE ECHOSWITCH II
This general purpose ultrasonic switch and controller provides non-contact level detection
up to 24.6’ (7.5 m) with 3 SPDT 60 VA 1A relays. EchoSwitch II features digital
push button confi guration, eliminating target calibration. Each relay can be confi gured
on a single set point to control pumps, valves or alarms. In addition, all 3 relays can be
simplexed, duplexed or triplexed. EchoSwitch II now features an integrated timer with
pump/valve delay and timed pump alternation. The switch is well suited for a broad
range of corrosive, waste and slurry type media. EchoSwitch II is broadly selected for
atmospheric day tanks, pump lift stations and waste sump applications. It features noncontact
level detection with integral 3-channel relay control, simple digital push button
confi guration, pump simplex, duplex and triplex options. It is available in 2.5m (8.2’) or
7.5m (24.6’) range with metric or imperial mount thread. It is constructed of a polycarbonate
NEMA 4X rated enclosure with a rugged PVDF transducer.
FLOWLINE CONTACT LEVEL SENSORS
Flowline contact sensors are available in buoyancy, ultrasonic, and vibration form. They
are intrinsically safe for use in general purpose or hazardous applications, these switches
are broadly applied in chemical, waste, hydrocarbon and petroleum based liquids. Media
examples include sulfuric acid, diesel fuel and wastewater. These submersible sensors
are universally mounted through the wall or inside the tank. They are available in a variety
of corrosion resistant materials making them suitable for a wide variety of applications
and fl uids.