chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

Applications
• Municipal Water and Sewage Treatment
• Industrial Waste Water Treatment and Neutralization
• Plating
• Food and Beverage Processing and Manufacturing
• Pulp and Paper
• Chemical Manufacturing
• Automotive Manufacturing
500 SERIES COMBINATION PH /ORP SENSORS
The 500 Series Combination pH and ORP probes are inexpensive so they provide exceptional
value for those non-challenging applications. They come complete with a standard
10ft cable but can be supplied with a cable of virtually any length. It comes complete with
tinned wire leads and a single junction. The cable is available in 5 wire or with a two wire
4-20 mA output built-in. Due to the quality of this product, the manufacturer offers a 1
year limited warranty.
Features
• Inexpensive
• 10 ft (3.3m) cable length
• Flow thru or submersion
• Industrial strength
• Tinned wire leads
• Single junction
• 1 year limited warranty
Parameter
Enhanced
Performance
Part # Measured Body Type
Options
P-525 pH CPVC body, 1/2" MNPT threaded front end None
P-575 pH CPVC body, 1" MNPT threaded ends None
P-585 pH Epoxy body, variable insertion - includes 3/4" CPVC compression fi tting None
R-525 pH CPVC body, 1/2" MNPT threaded front end None
R-575 pH CPVC body, 1" MNPT threaded ends None
R-585 pH Epoxy body, variable insertion - includes 3/4" CPVC compression fi tting None
Notes:
• Standard cable length is 10 ft (3m) . For other lengths, please specify.
• For automatic temperature compensation on the pH probes, add a “K” to the end of the part number.
• BNC For a nMBNC connector, add a “BNC” to the end of the part number.
• For a GLI Temperature compensation device, PT1000 RTD, add a “1” to the end of the part number.
• For an AquaMetrix Temperature compensation device, 300 ohm thermister, add a “2” to the end of the part number.
5-5
5