chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

Recommendations

Info

SIMONA® VERSADUR® CLEAR PVC SHEET Applications • Chemical processing • Semiconductor processing equipment • Machined and fabricated parts • Work Stations Versadur - 4' x 8' sheet Part No. Thickness (inches) Wt. per Sheet (lbs) S110221 1/8 26.90 S110321 3/16 40.57 S110421 1/4 54.01 S110521 3/8 89.72 S110621 1/2 107.66 Notes: • Meets ASTM D-1784-81 Type I Grade I Class 12454. • Meets ASTM E 84 Flame Spread Rate 15, Fuel Contribution 0. • Meets UL 94V-0 Standards. • Meets Federal Specifi cation L-P 535e. • Maximum application temperature +140°F. • Custom lengths, sizes, and special requirements available upon request. • Versadur is offered complete with 2 sided protective foil. SIMONA® VERSADUR® and PVC/GLAS Type I sheet are extruded to exacting specifi cation for normal impact applications requiring transparency. This type of sheet has excellent corrosion resistance, very good dielectric properties, low moisture absorption, high rigidity, good abrasion resistance and excellent weathering properties. The material is also self-extinguishing. It is available in 4’ x 8’ sheets and two metric sizes in thickness up to 3/4”. Features • Normal Impact • Excellent chemical and corrosion resistance • Easy to fabricate, welded and machined • Showcase quality surface • Single- or double-side protective masking • Stress relieved, square, fl at sheet • Accurate to dimensional tolerances • Color consistent GLAS - 2000 x 1000 mm GLAS - 3000 x 1500 mm Wt. per Wt. per Thickness Sheet Thickness Sheet Part No. (mm) (lbs) Part No. (mm) (lbs) S114222 1 5.95 1 - S114322 2 12.13 S114323 2 27.12 S110222 3 18.08 S110223 3 40.79 S112222 4 24.25 S112223 4 54.45 S112522 5 30.20 S112523 5 67.90 S110422 6 36.16 S110423 6 81.57 S114622 8 48.28 8 S110522 10 60.41 10 S110622 12 72.53 12 S113122 15 90.61 15 Notes: • Custom lengths, sizes, colors and special requirements available upon request. • GLAS sheet is offered with two side protective foil. 4-5 4
4 4-6 SIMONA® CLEAR PVC SHEET TECHNICAL DATA SIMONA ® Clear PVC Sheet Physical ASTM Test Method Unit Typical Value Density D-792 g/cc 1.42 Water Absorption (24 hrs @ 73 °F) Mechanical D-570 % NA Tensile Strength D-638 PSI 7,500 Tensile Modulus D-638 PSI 435,000 Elongation D-638 % 20 Izod Impact D-256 ft. lbs./in. 1.2 Rockwell Hardness D-785 “R” scale 107 Thermal Heat Distortion Temperature D-648 - - at 66 psi D-648 °F 162 at 264 psi D-648 °F 160 Vicat Softening Temperature D-1525 °F 167 Coeffi cient of Thermal Expansion D-696 in./in. °C <strong>80</strong> x 10-6 Temperature Range °F Electrical +32 to +140 Volume Resistivity D-257 ohm·cm >1015 Flammability Flammability self-extinguishing DIN 4102 low fl ammability SIMONA ® ASTM Test PVCGLAS Sheet Physical Method Unit Typical Value Density D-792 g/cc 1.38 Water Absorption (24 hrs @ 73 °F) Mechanical D-570 % 0.04 Tensile Strength D-638 PSI 10,200 Tensile Modulus D-638 PSI 426,000 Elongation D-638 % 36 Izod Impact D-256 ft. lbs./in. 0.52 Rockwell Hardness D-785 “R” scale 115 Thermal Heat Distortion Temperature D-648 at 66 psi D-648 °F 144 at 264 psi D-648 °F 138 Vicat Softening Temperature D-1525 °F 152 Coeffi cient of Thermal Expansion D-696 in./in. °C <strong>80</strong> x 10-6 Temperature Range °F +32 to +140 Electrical Volume Resistivity D-257 ohm·cm >1015 Flammability Flammability self-extinguishing 94V-0 low fl ammability DIN 4102 B1 up to 4 mm
Page 1 and 2:
PLASTICS FOR TODAY’S INDUSTRY CHE
Page 3 and 4:
TABLE OF CONTENTS PVC, C, CCPV PVC,
Page 5 and 6:
1 1-2 CHEMKOR SCHEDULE 80 FITTINGS
Page 7 and 8:
1 1-4 CHEMKOR SCHEDULE 80 FITTINGS
Page 9 and 10:
1 1-6 Applications • Swimming Poo
Page 11 and 12:
1 1-8 CHEMKOR SCHEDULE 40 GRAY FITT
Page 13 and 14:
1 1-10 NOMINAL PIPE SIZE CHEMKOR SC
Page 15 and 16:
1 1-12 Part Number Nominal Pipe Siz
Page 17 and 18:
1 1-14 20º BEND 90º SOCKET ELBOW
Page 19 and 20:
1 1-16 CHEMKOR SCHEDULE 80 CPVC FIT
Page 21 and 22:
1 1-18 NOMINAL PIPE SIZE CHEMKOR SC
Page 23 and 24:
1 1-20 Part Number MM Nominal Pipe
Page 25 and 26:
1 1-22 Relative Humidity 60% or Les
Page 27 and 28:
1 1-24 PVC AND CPVC S80 EXPANSION J
Page 29 and 30:
1 1-26 NATURAL POLYPROPYLENE SCHEDU
Page 31 and 32: 1 1-28 Applications • Semi-conduc
Page 33 and 34: 1 1-30 SOCKET TEES 90° SOCKET ELBO
Page 35 and 36: 2 2-2 LXT ® SCHEDULE 80 PIPE Ultra
Page 37 and 38: 2 Notes: • IN HG refers to inches
Page 39 and 40: 2 2-6 Applications • Corrosive wa
Page 41 and 42: 2 2-8 FEATURES • Split pipe and f
Page 43 and 44: 2 Notes: • The data contained her
Page 45 and 46: 2 2-12 IPS Pipe Size Actual OD (IN)
Page 47 and 48: 2 2-14 Applications • Low-grade D
Page 49 and 50: 2 2-16 Applications • Ultra-Pure
Page 51 and 52: 2 2-18 SG 110 SOCKET FUSION MACHINE
Page 53 and 54: 2 2-20 MCELROY 824 FUSION MACHINE
Page 55 and 56: 3 3-2 +GF+ 375 TRUE UNION BALL VALV
Page 57 and 58: 3 3-4 CHEMKOR BUTTERFLY VALVES Chem
Page 59 and 60: 3 3-6 SUPER C COMPACT BALL VALVES T
Page 61 and 62: 3 3-8 CALIBRATED NEEDLE VALVES The
Page 63 and 64: 3 3-10 Notes: • The 4” valve ha
Page 65 and 66: 3 3-12 PRESSURE REGULATORS The pres
Page 67 and 68: 3 3-14 Notes: • Size range 3/8”
Page 69 and 70: 3 3-16 +GF+ PNEUMATIC ACTUATED BALL
Page 71 and 72: 3 3-18 +GF+ ELECTRIC ACTUATED BALL
Page 73 and 74: 3 3-20 +GF+ PNEUMATIC ACTUATED DIAP
Page 75 and 76: 3 3-22 HAYWARD BUS CONTROL SYSTEM S
Page 77 and 78: 3 3-24 HAYWARD EAU ELECTRIC ACTUATO
Page 79 and 80: 4 4-2 SIMONA® PVC TYPE I SHEET TEC
Page 81: 4 4-4 SIMONA® PVC TYPE II SHEET TE
Page 85 and 86: 4 4-8 Application • Semiconductor
Page 87 and 88: 4 4-10 Applications • Food proces
Page 89 and 90: 4 4-12 ULTRA HIGH MOLECULAR WEIGHT
Page 91 and 92: 4 4-14 Applications • Sanitary we
Page 93 and 94: 4 4-16 PVDF Natural Extruded Sheet
Page 95 and 96: 4 4-18 Diameter (Inches) PVC-CAW 15
Page 97 and 98: 4 4-20 Hollow PVC and CPVC O.D. (in
Page 99 and 100: 4 4-22 RESIN CODE DESCRIPTION BASE
Page 101 and 102: 4 4-24 PULTRUDED GRATING DURADEK®
Page 103 and 104: 4 4-26 FIBERGLASS STRUCTURAL SHAPES
Page 105 and 106: 4 4-28 FIBERGLASS STRUCTURAL SHAPES
Page 107 and 108: 4 4-30 SAFRAIL FIBERGLASS LADDERS S
Page 109 and 110: 4 4-32 ZINZER WELDING ACCESSORIES P
Page 111 and 112: 4 4-34 LARAMY ECONOMY COMPRESSOR/TO
Page 113 and 114: 4 4-36 WEGENER AIRTHERM HOT AIR WEL
Page 115 and 116: 4 4-38 FIBERGLASS THREADED ROD AND
Page 117 and 118: AQUAMETRIX SHARK 120/240 CONTROLLER
Page 119 and 120: Applications • Municipal Water an
Page 121 and 122: Applications • Municipal Water an
Page 123 and 124: IP80 SERIES PADDLE WHEEL FLOW SENSO
Page 125 and 126: AVFM-II AREA VELOCITY FLOW LEVEL MO
Page 127 and 128: SIGNET 8900 MULTI-PARAMETER CONTROL
Page 129 and 130: SIGNET 2450 PRESSURE SENSOR The 245
Page 131 and 132: FLOWLINE ECHOPOD The Flowline EchoP
Page 133 and 134:
Part # Material FC-MT-1 CPVC/POLYPR
Page 135 and 136:
Notes: • For the sensor type of p
Page 137 and 138:
Part # Pipe Size GPM LPM Flow Direc
Page 139 and 140:
F-410N MACHINED ACRYLIC TUBE FLOWME
Page 141 and 142:
F-430N MACHINED ACRYLIC TUBE FLOWME
Page 143 and 144:
Materials of Construction Meter Bod
Page 145 and 146:
Materials of Construction Meter Bod
Page 147 and 148:
Materials of Construction Pipe fi t
Page 149 and 150:
Specifi cations Max. Working Pressu
Page 151 and 152:
UNI-SPRAY NOZZLES Uni-Spray Nozzles
Page 153 and 154:
6 6-2 APPLICATIONS • Pumping for
Page 155 and 156:
6 Features • Leak-proof, seal-les
Page 157 and 158:
6 6-6 WEBSTER IN-TANK FILTRATION SY
Page 159 and 160:
6 6-8 APPLICATIONS • Transferring
Page 161 and 162:
6 6-10 Features • Leak-Resistant
Page 163 and 164:
6 6-12 Features • True Depth Filt
Page 165 and 166:
6 6-14 Features • Recovers 99% of
Page 167 and 168:
6 6-16 PENGUIN HF IN-TANK FILTRATIO
Page 169 and 170:
6 6-18 Options • Flanged connecti
Page 171 and 172:
6 6-20 Features • PPL or PVDF Con
Page 173 and 174:
6 6-22 Options • Stainless steel
Page 175 and 176:
6 Notes: • Other perforations may
Page 177 and 178:
6 6-26 MAZZEI INJECTORS Mazzei® In
Page 179 and 180:
6 Applications • Chemical • Was
Page 181 and 182:
6 6-30 C-1500N CHEM-FEED DIAPHRAGM
Page 183 and 184:
6 CENTRIFUGAL PUMPS Ideal type for
Page 185 and 186:
7 Notes: • Tanks must be placed o
Page 187 and 188:
7 Notes: • Tanks must be placed o
Page 189 and 190:
7 7-6 DOUBLE WALL CONTAINMENT TANKS
Page 191 and 192:
7 Notes: • Standard colour is nat
Page 193 and 194:
7 7-10 Chemical resistance (general
Page 195 and 196:
7 7-12 BOLTED FLANGE FITTINGS Bolte
Page 197 and 198:
Applications • Swimming Pools •
Page 199 and 200:
APPLICATIONS • Food & beverage di
Page 201 and 202:
Applications • Food & beverage di
Page 203 and 204:
Notes: • Suggested operating temp
Page 205 and 206:
Notes: • Dimensions in brackets i
Page 207 and 208:
Size (IN) Insert Tee (Insert x Inse
Page 209 and 210:
Approx. Length (IN) Max Bundle Diam
Page 211 and 212:
Male Connector (Tube x MPT) Part #
Page 213 and 214:
Notes: • Available in 20ft length
Page 215 and 216:
INSTADUCT® PVC VENTILATION DUCT FI
Page 217 and 218:
INSTADUCT® PVC VENTILATION DUCT PI
Page 219 and 220:
Branches shall not be positioned di
Page 221 and 222:
Notes: • Available in 10 ft and 2
Page 223 and 224:
K G a, lbs-moles/hr-ft 3 -mole frac
Page 225 and 226:
MASS TRANSFER TOWER PACKING Mass Tr
Page 227 and 228:
Notes: • Other plastics are avail
Page 229 and 230:
APPLICATIONS • Downstream of scru
Page 231 and 232:
B HF THERMOPLASTIC CENTRIFUGAL FANS
Page 233 and 234:
PVC (Polyvinyl Chloride) conforming
Page 235 and 236:
Handling strength, however, is not
Page 237 and 238:
GUIDELINES FOR PROCESSING AND MACHI
Page 239 and 240:
INSTALLATION INSTRUCTIONS SOLVENT W
Page 241 and 242:
JOINING 1. Immediately upon fi nish
Page 243 and 244:
Number of Joints Per...* PIPE SIZE
Page 245 and 246:
INSTALLATION INSTRUCTIONS 3. Simult
Page 247 and 248:
INSTALLATION INSTRUCTIONS DIMENSION
Page 249 and 250:
CAUTION: THE METAL BARREL OF THE WE
Page 251 and 252:
2. A tapered plug must be inserted
Page 253 and 254:
TRENCHING The trench should be of a
Page 255 and 256:
condition. Where water fl ooding is
Page 257 and 258:
Temperature Correction Factors Oper
Page 259 and 260:
4. A check valve installed near a p
Page 261 and 262:
Normally, piping systems are design
Page 263 and 264:
Many commercial, industrial and gov
Page 265 and 266:
CHEMICAL RESISTANCE GUIDE FOR VALVE
Page 267 and 268:
PLASTICS AND ELASTOMERS AT MAXIMUM
Page 269 and 270:
CHEMICALS AND FORMULA CONCENTRATION
Page 271 and 272:
Page 273 and 274:
CONCENTRATION CHEMICALS AND FORMULA
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
COLLAPSE PRESSURE - PVC DUCT Graph
Page 289 and 290:
I. STANDARDS FOR MEASURING HEADS AN
Page 291 and 292:
HEAD - The ability of a pump to pus
Page 293 and 294:
CORRECTION FACTORS CAPACITY AND EFF
Page 295 and 296:
Symbols 60 Series Hot Tap Ph / ORP
Page 297 and 298:
Hayward EVR Electric Actuator 3-24
Page 299 and 300:
PVC And CPVC S80 Expansion Joints 1
Page 301 and 302:
TERMS PRICES All prices shown are s
Page 303 and 304:
NOTES 10 10-71
Page 305 and 306:
NOTES 10 10-73
Page 307 and 308:
HWY. 27 176 ST. (HWY 15) 149 ST. MA
show all

chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?