chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SIGNET 8900 MULTI-PARAMETER CONTROLLER<br />
The Signet 8900 Multi-Parameter Controller takes the concept of modularity to the extreme.<br />
Each 8900 is fi eld commissioned with the users specifi ed combination of inputs,<br />
outputs, and relays using simple-to-install modular boards into the base unit. To assemble<br />
a controller, there is a choice of two base units offered with a choice of back-lit LCD or<br />
vacuum fl uorescent display. Then, continue building with a selection of plug-in modules<br />
for either two, four, or six input channels which accepts any of the Signet sensors listed<br />
below, and/or other manufacturer’s sensors via a 4 to 20 mA signal converter (Signet<br />
Model <strong>80</strong>58). To complete your unit, choose a power module with universal AC line<br />
voltage or 12 to 24 VDC ±10%, regulated. Analog output and relay modules are available<br />
and easily installed. Plus, the 8900 will support up to four additional relays via an<br />
external relay module. Digital input to the 8900 enables longer cable runs and simplifi ed<br />
wiring with minimal noise interference. Advanced relay logic allows users to select up to<br />
3 measurement sources to trigger 1 relay. Derived measurements include difference, sum,<br />
ratio, percent recovery, percent rejection, percent passage and BTU.<br />
SIGNET 2724-2726 PH/ORP ELECTRODES<br />
The Signet 2724-2726 pH and ORP Electrodes features a patented reference electrode<br />
design and uses the unique foul-proof patented DryLoc® connector. The large area PE<br />
reference junction and pathway is constructed to increase the total reference effectiveness<br />
and ensures long service life.<br />
The robust Ryton® threaded sensor body and choice of fl at pH, bulb pH, or fl at ORP<br />
sensing elements provides broad range of chemical compatibility for a wide variety of<br />
applications. There are two optional sensing versions, HF and LC, available. The quick<br />
temperature response is available in either a PT-1000 or 3KΩ temperature sensor and<br />
allows compatibility with all Signet pH/ORP instruments. The 2724-2726 electrodes are<br />
general-purpose sensors ideal for a wide range of applications. The sensors incorporate<br />
¾” NPT or ISO 7/1 R¾ threads for installing into standard pipe-tees. They can also be<br />
mounted directly into Signet standard fi ttings.<br />
SIGNET 2754-2757 PH/ORP ELECTRODES<br />
The Signet 2754-2757 pH and ORP Electrodes feature a unique foul-proof DryLoc®<br />
connector with gold-plated contacts designed specifi cally for use with the Signet 2750<br />
and 2760 Sensor Electronics and preamplifi ers. These dependable and highly responsive<br />
electrodes feature a large reference chamber volume and intelligent positioning<br />
of internal elements that combine to extend the service life. The electrodes are offered<br />
with either fl at or bulb sensing elements. The fl at versions allow sediment and particles<br />
to sweep past the measurement surface, minimizing the risks of abrasion, breakage and<br />
coating. The bulb versions can be used for general purpose applications and are also offered<br />
with a glass or plastic body for use with the 3719 Wet-Tap assembly.<br />
The choice of a PT-1000 or 3KO temperature sensor allows compatibility with all Signet<br />
pH/ORP instruments. The 2754-2757 electrodes are the fl agship sensors of the Signet<br />
pH/ORP product line. They are all-purpose sensors ideal for a wide range of universal<br />
applications.<br />
5-11<br />
5