chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

4
4-30
SAFRAIL FIBERGLASS LADDERS
SAFRAIL fi berglass ladders and ladder cages mounted on the sides of tanks and
buildings are a common sight in a wide range of industries. Even in complete immersion
applications, fi berglass has outlasted aluminum and steel and required little or no maintenance.
SAFRAIL ladders are fabricated in a standard 18” (46mm) rung width confi guration
with 12” (30mm) rung spacings. Various ladder lengths can be produced as practical.
Standard SAFRAIL ladder and ladder cage systems are designed and fabricated to
meet the requirements of OSHA 1910.27. Custom colors and custom designed ladders and
access cages can be fabricated upon request. Ladders can be shipped pre-assembled for
installation in the fi eld. SAFRAIL ladders and ladder cage systems are produced using
a premium grade polyester resin system with fl ame retardant and ultraviolet (UV) inhibitor
additives. A vinyl ester resin system is available upon request for additional corrosion
resistance. Standard side rails and cages are pigmented OSHA safety yellow. The rungs are
a pultruded fi berglass polyester tube with a fl uted, non-skid surface.
COMPOSOLITE® FIBERGLASS BUILDING SYSTEM
COMPOSOLITE® is an advanced composite building panel system suitable for major
load bearing structural applications. Features of COMPOSOLITE® include Corrosion
Resistant, Lightweight, Low Electrical & Thermal Conductivity, Easy To Maintain, Cost
Effective, and Easy To Install Interlocking Joints. The modular construction system
consists of six interlocking components. The main component is a 3” thick x 24” wide
open-ribbed building panel. 3-way and 45° connectors allow the system components to
turn corners and facilitate the joining of walls or sides. Toggles lock panels and connectors
together securely. For added fl exibility, the system also includes a hanger and an end
cap. For permanent structures, joints between panels and connectors are bonded during
assembly. This uniquely designed system of interlocking components makes it possible to
design fi berglass structures for a broad range of construction applications with an almost
unlimited number of confi gurations.COMPOSOLITE® is available in standard polyester
(green), polyester fi re retardant (gray) or vinyl ester fi re retardant (beige) resin systems.
The standard fi re retardant resins meet the requirements of Class 1 rating of 25 or less per
ASTM E-84 and the self-extinguishing requirements of ASTM D-635. The resin contains
a UV inhibitor and the composite includes a surface veil on all exposed surfaces for enhanced
corrosion and UV protection. Other resins and colors are available upon request.
DURASHIELD® FOAM CORE BUILDING PANELS
DURASHIELD® is a tongue-and-groove fi berglass pultruded panel comprised of a pultruded
skin over a foam core. Features include integral insulation, lightweight
corrosion resistance , low electrical & thermal conductivity, strong, fl ame retardance
and transparency to electromagnetic emissions. The pultruded fi berglass skin is available
in either an isophthalic polyester or vinyl ester resin. Both resin systems are fl ame
retardant (UL94 VO). Vinyl ester is utilized in more corrosive applications. A synthetic
surfacing veil is incorporated into the skin to improve weathering, corrosion resistance and
resistance to degradation from ultraviolet rays. Resistance to weathering can be further
enhanced by the application of a polyurethane paint. The core material is rigid closed-cell
urethane foam. The foam core provides an insulation “R” factor of 7 for the 1” panel and
21 for the 3” panel. DURASHIELD® panels are available in 1” x 12” and 3” x 24” sizes.
The panels can be produced in any length that is practical. Typical lengths would be in the
12’ to 32’ range.