chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

NATURAL POLYPROPYLENE SCHEDULE 80 FITTINGS
LENGTH
(INCHES) PART #
DIAMETER
(INCHES)
1/2 CLOSE 661063
1/2 SHORT 661078
1/2 3 661081
1/2 4 661082
1/2 5 661083
1/2 6 661084
3/4 CLOSE 661104
3/4 SHORT 661105
3/4 3 661106
3/4 4 661107
3/4 5 661108
3/4 6 661109
1 CLOSE 661133
1 SHORT 661134
1 3 661135
1 4 661136
1 5 661137
1 6 661138
1 1/2 CLOSE 661213
1 1/2 SHORT 661214
1 1/2 3 661215
1 1/2 4 661216
1 1/2 5 661217
1 1/2 6 661218
2 CLOSE 661251
2 SHORT 661252
2 3 661253
2 4 661254
2 5 661255
2 6 661256
3 CLOSE 661338
3 3 661339
3 4 661341
3 5 661342
3 6 661343
4 CLOSE 661422
4 4 661423
4 5 661430
4 6 661426
REDUCER
BUSHINGS
SOCKET X SLIP
REDUCER
BUSHINGS
FPT x MPT
NOMINAL
PIPE
SIZE
3/4 x 1/2 637101 639101
1 x 1/2 637130 639130
1 x 3/4 637131 639131
1 1/2 x 1 637211 639211
2 x 1 637249 639249
2 x 1 1/2 637251 639251
3 x 2 637338
4 x 3 637422
Notes:
• Socket valves, fl anges, and unions, regardless of size are rated at 150 psi for water service at 73.4°F(23°C).
• Other fi ttings are available on request.
• All 1/2” - 4” Moulded fl anges have a 150 psi Maximum Internal Pressure Rating @ 73°F (23°C)
• No provisions have been made for pressure surges, water hammer, or other conditions which should be considered.
• We recommend back welding for all 6” socket connections.
1-27
1