chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

Applications:
• Variable grade pressure
sewer systems
• Pressure water systems
• Golf club irrigation
• Mobile home parks
Notes:
• Meets ASTM D-1784
cell classifi cation
12454B and ASTM
D-2241; D-2466 and
1599 for dimensions
and testing
performance.
CLAMP-IT TM PVC TAPPING SADDLES
The Clamp-It Tapping saddles allow you to tap into existing piping systems without having to cut
out and insert a tee. The O-ring and O-ring groove are designed so that there is no gap between
the installed saddle and the pipe. When pressure is applied the pipe compression is replaced by
the fl uid pressure without increasing the pressure on the saddle. The hinge design eliminates the
need for two clamping wedges. The clamping wedge equally distributes the pressure over the
entire width of the saddle. It locks and aligns the saddle top and bottom into proper position.
IPS
IPS
IPS
Pipe
Pipe
Pipe
Part #
Size Tap Size Part #
Size Tap Size Part #
Size Tap Size
432007 2" 3/4" IPS SLIP 453007 3" 3/4" IPS SLIP 456007 6" 3/4" IPS SLIP
432010 2" 1" IPS SLIP 453010 3" 1" IPS SLIP 456010 6" 1" IPS SLIP
432012 2" 1 1/4" IPS SLIP 453012 3" 1 1/4" IPS SLIP 456012 6" 1 1/4" IPS SLIP
432015 2" 1 1/2" IPS SLIP 453015 3" 1 1/2" IPS SLIP 456015 6" 1 1/2" IPS SLIP
422007 2" 3/4" IPS FIPT
453020 3" 2" IPS SLIP 456020 6" 2" IPS SLIP
422010 2" 1" IPS FIPT 443007 3" 3/4" IPS FIPT 446007 6" 3/4" IPS FIPT
422012 2" 1 1/4" IPS FIPT 443010 3" 1" IPS FIPT 446010 6" 1" IPS FIPT
422015 2" 1 1/2" IPS FIPT 443012 3" 1 1/4" IPS FIPT 446012 6" 1 1/4" IPS FIPT
443015 3" 1 1/2" IPS FIPT 446015 6" 1 1/2" IPS FIPT
432507 2 1/2" 3/4" IPS SLIP 443020 3" 2" IPS FIPT 446020 6" 2" IPS FIPT
432510 2 1/2" 1" IPS SLIP
432512 2 1/2" 1 1/4" IPS SLIP 454007 4" 3/4" IPS SLIP 458007 8" 3/4" IPS SLIP
432515 2 1/2" 1 1/2" IPS SLIP 454010 4" 1" IPS SLIP 458010 8" 1" IPS SLIP
432520 2 1/2" 2" IPS SLIP 454012 4" 1 1/4" IPS SLIP 458012 8" 1 1/4" IPS SLIP
454015 4" 1 1/2" IPS SLIP 458015 8" 1 1/2" IPS SLIP
422507 2 1/2" 3/4" IPS FIPT 454020 4" 2" IPS SLIP 458020 8" 2" IPS SLIP
422510 2 1/2" 1" IPS FIPT
422512 2 1/2" 1 1/4" IPS FIPT 444007 4" 3/4" IPS FIPT 448007 8" 3/4" IPS FIPT
422520 2 1/2" 2" IPS FIPT 444010 4" 1" IPS FIPT 448010 8" 1" IPS FIPT
444012 4" 1 1/4" IPS FIPT 448012 8" 1 1/4" IPS FIPT
444015 4" 1 1/2" IPS FIPT 448015 8" 1 1/2" IPS FIPT
444020 4" 2" IPS FIPT 448020 8" 2" IPS FIPT
TRANSITION UNIONS
Threaded Metal Insert and Stainless Steel Collar are molded-in-place as an Integral part of each fi tting for superior
strength. Secondary O-ring seal compensates for expansion and contraction variation between materials. Low Profi le
design. Available in sizes from 1/2” to 2” IPS. Manufactured from high quality CPVC and PVC materials for superior
chemical resistance. Metal Inserts 316 Stainless Steel or Brass
Patented Design
Computer engineered design minimizes stress problems normally associated with metal-to-plastic piping system transitions.
Patented design is backed by over twenty-fi ve years of research and fi tting development.
Superior Metal -to- Plastic Transition
Strong Industrial grade metal-to –plastic Schedule 80 Transition Fittings feature molded-in-place metal threads with form
compressed O-ring for optimum expansion and contraction barrier. ASTM Schedule 80 slip sockets and ANSI spec tapered
pipe threads for leak-tight connections.
1-23
1