chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

3
3-8
CALIBRATED NEEDLE VALVES
The Chemtrol calibrated needle valve is ideally suited to the fi ne regulation of liquid
fl ow required in instrumentation and laboratory work. The fl ow through the 1/4” valve
can be accurately adjusted by observing the knob handle exposing numerals molded on
the valve body. It has a positive stop for safe operation and Tefl on seats to prevent wear
on needle
T45CN-V 1/4" FPT x 1/4" FPT
Knob Position 1 2 3 4 5 6 7 8
Flow rate (GPM @50 psi) 0.85 1.41 1.79 2.15 2.42 3.15 4.40 4.50
CHEMTROL PVC CHEMCOCK VALVES
The Chemtrol chemcock valve is ideal for laboratories, monitoring systems, sampling,
and a variety of other applications as original equipment. Its calculated fl uid fl ow coeffi
cient (Cv) is based on the laying length being equivalent to 1/4” Schedule 80 pipe. It
opens and closes with only a quarter turn. These valves come complete with replaceable
FPM O-ring seats and seals and exhibits no sticking or galling. It is rated at 150 psi at
73.4°F(23°C) water –non-shock–full port.
Part # Description
Y PATTERN VALVES
The Chemtrol Y-pattern globe valve exhibits minimal pressure-drop, even when
compared with a conventional upright style globe valve. Therefore, it is an excellent
choice for combination on-off and throttling applications. One of the more common
applications for this valve is as a pump by-pass control valve. It features malleable
glass reinforced PTFE (Tefl on) seat disk ensuring long-lasting positive sealing and is
constructed of PVC and FPM seals. The stub acme thread on stem provides rapid openclose
operation.
Size 1/4" 1/2" 3/4" 1"
Part # 2151204 2151207 2151208 2151209
ANGLE VALVES
A45CC-V 1/4" Hose x 1/4" MPT
M45CC-V 1/4" MPT x 1/4" MPT
HAYWARD UNIVERSAL STOPCOCKS
For on/off, restricted fl ow or sampling applications, the Hayward LC12 StopCock is easily
adaptable to any piping connection. Furnished with the valve is a 1/4˝ NPT female pipe
thread, 1/4˝ NPT male pipe thread and hose barb end connectors for 1/4˝ through 7/16˝ I.D.
tubing. These allow the valve to be fi tted with up to six different end connection combinations.
Simply attach the end connections you need – they are all supplied with each valve.
The Chemtrol Angle Valve is used where a higher pressure-drop is desirable.
One of its more common applications is as a pump by-pass control valve. It features malleable glass reinforced
PTFE (Tefl on) seat disk ensuring long-lasting positive sealing and is constructed of PVC and FPM seals. The
stub acme thread on stem provides rapid open-close operation.
Size 1/4" 1/2" 3/4" 1"
Part # 2151804 2151807 2151808 2151809