chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Applications<br />
• Industrial<br />
• Medical<br />
• Thermoforming<br />
• Die Pads<br />
• Hinges<br />
• Impact pads<br />
• Orthotic and Prosthetic devices<br />
• Thermoformed parts<br />
Features<br />
• Light-weight<br />
• Good impact resistance<br />
• Extremely fl exible<br />
• Easily cleaned<br />
• Thermoforming performance<br />
• Meets food handling guidelines<br />
• No moisture absorption<br />
• Chemical- and corrosion-resistant<br />
LDPE Natural - 4' x 8'<br />
Thickness Wt. (lbs/<br />
Part No. (inches) sheet)<br />
S300231 1/8 19.2<br />
S300331 3/16 28.8<br />
S300431 1/4 38.4<br />
S300531 3/8 57.6<br />
S300631 1/2 76.8<br />
S300731 3/4 115.2<br />
S300831 1 153.6<br />
Notes:<br />
• Meets ASTM D 1248-84 Type III, Class A (Natu<br />
ral), Class C (Black).<br />
• Meets L-P 512C-LP-390, Class H, Type I, Grades<br />
1 and 3.<br />
• Meets FDA Regulation Title 21 CFR 177.1520<br />
(Natural only).<br />
• Meets Federal Specifi cation LP-390B Type III,<br />
Class H, Grade I.<br />
• Maximum application temperature +1<strong>80</strong>°F.<br />
• Custom lengths, sizes, and special requirements<br />
available upon request.<br />
• LDPE sheet is offered complete with no<br />
protective foil.<br />
LOW DENSITY PE SHEET<br />
Low density polyethylene (LDPE) is more fl exible than HDPE, which makes it a good<br />
choice for prosthetic devices, most of which are either drape formed or vacuum formed.<br />
Its impact resistance makes it a natural for impact pads, while its easy machinability<br />
makes it a good choice for fabricated parts where chemical and corrosion resistance is<br />
demanded. LDPE is stress relieved and a “natural” color. It is available in 4’ x 8’ sheets<br />
in thicknesses up to 1”.<br />
Physical Properties Metric English Comments<br />
Specifi c Gravity 0.92 g/cc 0.0332 lb/in³ ASTM D792<br />
Water Absorption Max 0.01 % Max 0.01 % Immersion, 24hr; ASTM<br />
D570(2)<br />
Water Absorption at Saturation<br />
Mechanical Properties<br />
Max 0.01 % Max 0.01 % Immersion; ASTM D570(2)<br />
Hardness, Shore D 45 45 ASTM D2240<br />
Tensile Strength, Ultimate 9.65 MPa 1400 psi ASTM D638<br />
Elongation at Break 100 % 100 % ASTM D638<br />
Tensile Modulus 0.393 GPa 57 ksi ASTM D638<br />
Flexural Modulus 0.2 GPa 29 ksi ASTM D790<br />
Flexural Yield Strength 10.3 MPa 1500 psi ASTM D790<br />
Compressive Strength 9.65 MPa 1400 psi 10% Def., 73°F; ASTM D695<br />
Compressive Modulus 0.372 GPa 54 ksi ASTM D695<br />
Izod Impact, Notched<br />
Electrical Properties<br />
NB NB ASTM D256 Type A<br />
Surface Resistivity per Square Min Min<br />
ASTM D257<br />
Thermal Properties<br />
1e+015 ohm 1e+015 ohm<br />
Melting Point 118 °C 244 °F Crystalline, Peak; ASTM D3418<br />
Maximum Service Temperature, Air 71.1 °C 160 °F Long Term<br />
Flammability, UL94 (Estimated Rating)<br />
Qualitative Processing Properties<br />
HB HB 1/8 inch<br />
Compliance - FDA Compliant<br />
Machinability 3 1-10, 1=Easier to Machine<br />
Service in Alcohols Unacceptable<br />
Service in Aliphatic Hydrocarbons Unacceptable<br />
Service in Aromatic Hydrocarbons Unacceptable<br />
Service in Chlorinated Solvents Unacceptable<br />
Service in Ethers Unacceptable<br />
Service in Ketones Unacceptable<br />
Service in Strong Acids Unacceptable<br />
Service in Strong Alkalies Unacceptable<br />
Service in Sunlight Unacceptable<br />
Service in Weak Acids Unacceptable<br />
Service in Weak Alkalies Unacceptable<br />
4-11<br />
4