chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

Features
• Nominal and Absolute Particle
Retention Ratings
• Superior Flow Characteristics
• High Dirt Holding Capacity
• Many Lengths and Cartridge Styles
PENGUIN SERIES PC CARBON FILTER CARTRIDGES
Penguin carbon fi lter cartridges are a one-step carbon and fi ltration treatment. These Series
PC carbon cartridges eliminate the problems associated with loose carbon treatment and
the need for a separate fi ltration system. The standard cartridge measures 2 3/4” O.D. with
lengths varying from 4” to 40” and fl ow rates up to 2 1/2 gpm. These Series PC carbon
cartridges are designed to be used in either single or multi-tubed vessels. These cartridges
are available in 4 different styles. Style GC is an outer wound cartridge which utilizes a
special high grade activated granular carbon with a very low sulfur content. Style CP is
also an outer wound cartridge which features layers of paper impregnated with activated
powdered carbon. Style C is a porous polyethylene shell containing high grade activated
granular carbon. Style M features an outer layer of polyolefi n webbing with an impregnated
carbon powder interior. Available options include:
Carbon Style: Granular Carbon/Outer Wound, Carbon Paper/Outer Wound, Granular
Carbon/Porous Shell, Impregnated Carbon/Outer Wound
Length: 4”, 6”, 9 3/4”, 9 7/8”, 10”, 20”, 30”, 40”
Core Material: Polypropylene, 304SS
Fiber Material/Shell: porous polyethylene/stand. poly. outer wound, fi brillated FDA
outer wound, polypropylene FDA outer wound, bleached cotton
FDA outer wound
Please contact customer service for assistance in sizing your Filter Cartridges.
PENGUIN PP PLEATED FILTER CARTRIDGES
Penguin pleated fi lter cartridges are an alternative to string wound or spun moulded fi lters.
These Series PP pleated cartridges are economical, multi-use, premium quality products
that are available in various micron ratings ranging from 50 micron nominal down to .10
micron absolute. End cap confi gurations include D.O.E. (double open end, fl at gasket)
and S.O.E. (single open end, external double 222 0-ring/button end cap). Filter medias
available include self-bonded fi ne diameter polypropylene fi bers as well as membranes
constructed of polypropylene, nylon, or PTFE. Series PP pleated cartridges contain no
surfactants or binders that can break down, leach out, or permit the typical problems of
channeling and media migration. Maximum effective open surface areas allow for high
fl ow rates at reduced pressure losses, as well as high dirt holding capacity, long service
life, large throughputs, and lower operating costs. Available options include:
Filter Media: nylon, nominal polypropylene, nominal submicronic polypropylene, absolute
polypropylene, absolute submicronic polypropylene, absolute Tefl on
Mircron Rating: 0.1A, 0.1, 0.2A, 0.2, 0.4A, 0.45A, 0.4, 0.8A, 1, 3, 5, 10, 15, 25, 30, 50
Length: 9 3/4”, 10”, 19 1/2”, 20”, 29 1/4”, 30”, 39”, 40”
End Cap: black industrial grade vinyl (style D only), blue FDA acceptable (style D only)
DOE fl at gasket, SOE external double 222 O-ring/ button end cap, DOE internal single
120 O-ring, SOE internal 020 O-ring/ button end cap
Gasket or O-Ring Material: Style D, Buna-N, EPR, viton, silicon,
Please contact customer service for assistance in sizing your Filter Cartridges.
6-13
6