chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

APPLICATIONS
• Downstream of scrubbers,
especially spray
scrubbers or towers.
• Process gas cleaning
• Evaporators
• Acids mists from electroplating
and electro-deposition
plants.
Notes:
• LTV2415 ABS (Black) are Fire Retardant modules.
APPLICATIONS
• Downstream of gas
scrubbers, especially
spray scrubbers
and packed columns.
• Fitted also to acid cool
ers, evaporating coolers
and evaporators.
FABCO ELIMINATOR TYPE LTH 2000
FEATURES
FEATURES
The Fabco Mist Eliminator, Type LTH 2000 is a profi le eliminator for horizontal gas
fl ow. It operates at high velocity and captures droplets down to approximately 10 micron
diameter. An important aspect of this design is that it has a drain channel which positively
prevents the captured liquid from being re-entrained into the gas stream. The
sophisticated aerodynamic design of the profi les cause the elimination of liquid droplets
by inertial forces. The profi les are designed with a main drain channel to capture the
bulk of the captured liquid and a number of small drain channels to prevent reentrainment
downstream of the venture like throat. By this combination of drain channels the
captured liquid droplets are prevented from re-entering.
• Removal effi ciency 99.9% of limit drop
size droplets and larger.
• High face velocity which results in com
pact units.
• Two profi les available, one with a single
drain channel, the other
with three to suit different applications.
• Easy to clean.
FABCO ELIMINATOR TYPE LTV 1500
The Fabco eliminator Type LTV 1500 is designed for vertical gas fl ow. It has been
developed to give high effi ciency mist elimination with low pressure drop. The multichamber
profi le causes the liquid droplets caught to be moved out of the gas stream such
that they can drain back to the process without re-entrainment. We recommend operating
conditions that consist of an inlet velocity of 4 m/s, and operating velocity of between 2.5
and 6 m/s. The LTV 1500 is available in Polypropylene, PVDF, and 304/316 Stainless
Steel. Other materials like Polystyrene, Noryl, PVC, CPVC, PPO, and ABS are available
upon request. The gas and the entrained liquid droplets are defl ected by means of the
vanes of the profi le. The droplets impinge on the walls of the profi les by inertial forces.
Ribs placed on the surface of the profi le cause the captured liquid to fl ow down the sides
where it can fall back into the process without re-entrainment.
• High effi ciency mist elimination combined
with very low pressure drop.
• Compact size fi nds wide application.
• Can be retrofi tted to scrubbers and other
process equipment.
• Available in a full range of corrosion
resistant materials.
LTH 2100 BLADES
PART NO. MATERIAL
LTH2100 PVC
LTH2400 PP.
Notes:
• We supply modular packs of profi les for installation into existing
housings, towers or vessels and complete units with housing for
pressure or vacuum operation
• We recommend operating conditions that consist of an inlet face
velocity of 2.5 - 6 m/s, and up to 12 m/s with two stages or more
for a single stage of eliminators.
• Also available in ABS, PVDF, Carbon Steel, Galvanized Steel, or
Stainless Steel (304, 316) upon request.
LTV 1500 ELIMINATOR MODULES
PART NO. MATERIAL MODULE WIDTH
LTV1500 POLYPRO 12" or 24"
LTV1520 PVC 12" or 24"
LTV1530 CPVC 12" or 24"
LTV1540 PVDF 12” or 24"
LTV2415 * ABS (BLACK) 12" or 24"
LTV2415C ABS (CLEAR) 12" or 24"
LTV1520C PVC (CLEAR) 12" or 24"
9-17
9