chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

CHEMKOR SCHEDULE 80 CPVC FITTINGS
150 LB
SOCKET
FLANGES
150 LB
THREADED
FLANGES
150 LB
BLIND
FLANGES
SOCKET
VANSTONE
FLANGES
SPIGOT
VANSTONE
FLANGES
SOCKET
CAPS
THREADED
CAPS
SOCKET
CROSSES
45°
SOCKET
LATERALS
NOMINAL
PIPE
SIZE
1/4 547002 548002 520002
3/8 547003 548003
1/2 551005 552005 553005 554005 556005 547005 548005 520005
3/4 551007 552007 553007 554007 556007 547007 548007 520007
1 551010 552010 553010 554010 556010 547010 548010 520010
1 1/4 551012 552012 553012 554012 556012 547012 548012 520012
1 1/2 551015 552015 553015 554015 556015 547015 548015 520015
2 551020 552020 553020 554020 556020 547020 548020 520020
2 1/2 551025 552025 553025 554025 556025 547025 548025 520025
3 551030 552030 553030 554030 556030 547030 548030 520030
4 551040 552040 553040 554040 556040 547040 548040 520040
5 551050 553050F 554050
6 551060 552060F 553060 554060 556060 547060 548060F 520060F
8 551080 552080F 553080 554080 556080 547080 548080F 520080F
10 551100F 553100 554100 556100 547100F 520100F 575100F
12 551120F 553120 554120 556120 547120F 520120F 575120F
14 551140F 553140F 554140 556140F 547140F 520140F 575140F
16 551160F 553160F 554160 556160F 547160F 520160F 575160F
18 551180F 553180F 554180F 556180F 547180F 520180F 575180F
20 551200F 553200F 554200F 556200F 547200F 520200F 575200F
24 551240F 553240F 554240F 556240F 547240F 520240F 575240F
Notes:
• CPVC SCH 80 fi ttings are produced in accordance with the following standards: ASTM D1784, ASTM F-439 (socket fi ttings), ASTM F-437 (threaded fi ttings).
• Flanges are 150 lb. ANSI B.16.5 dimensioned.
• Heavy duty wyes are produced from CPVC according to ASTM D1784, Cell Class 23447B and are pressure rated to 217 PSI.
• Fabricated fi ttings, custom manufactured and/or modifi ed FABCO products (FRP products, machined products, modifi ed standard products, etc.) cannot be returned
for credit or with restocking charge.
• Many other fi ttings are available on request.
• The maximum continuous working pressure of the fi ttings is equal to 150 PSI at 73.4°F(23°C). No provisions have been made for pressure surges, water hammer, or
other conditions which should be considered.
• All custom fabricated fi ttings are not subject to return. Many other fi ttings are available on request.
• “F” indicates a fabricated fi tting. Some fabricated fi ttings may be fi berglass reinforced. (F) indicates fi tting is available molded or fabricated.
1-17
1