chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

Recommendations

Info

CHEMICAL RESISTANCE CHART FOR SNYDER TANKS Chemical Conc. Resin Design Info Fitting Material Gasket Material Bolt Material Acetic Acid 60 HDLPE & XLPE 1.5/600 PP EPDM Hastelloy Acetic Acid <strong>80</strong> HDLPE 1.9/600 PP EPDM Hastelloy Acrylic Emulsions 50 XLPE 1.9/600 PVC EPDM 316SS Aluminum Sulfate 50 HDLPE & XLPE 1.5/600 PVC EPDM Hastelloy Ammonium Sulfate 40 HDLPE & XLPE 1.5/600 PVC EPDM Titanium Calcium Carbonate Saturated HDLPE & XLPE 1.9/600 PVC EPDM 316SS Calcium Chloride 40 HDLPE & XLPE 1.5/600 PVC EPDM Hastelloy DEF (Diesel Exhaust Fluid) 32.5 HDLPE & XLPE 1.35/600 PP/PVC EPDM 316SS Deionized Water 5 Megohm HDLPE & XLPE 1.5/600 PVC EPDM 316SS Ethyl Alcohol 100 HDLPE & XLPE 1.5/600 PVC EPDM 316SS Ethylene Glycol 100 HDLPE & XLPE 1.9/600 PVC EPDM 316SS Ferric Chloride 50 HDLPE & XLPE 1.9/600 PVC EPDM Hastelloy Ferric Sulfate 60 HDLPE & XLPE 1.9/600 PVC EPDM Hastelloy Ferrous Chloride Saturated HDLPE & XLPE 1.9/600 PVC EPDM Hastelloy Ferrous Sulfate 20 HDLPE & XLPE 1.5/600 PVC EPDM Hastelloy Hydrochloric Acid 37 HDLPE 1.9/600 PVC Viton Hastelloy Hydrofl uoric Acid 48 HDLPE 1.9/600 PP/PVC Viton Hastelloy Hydrofl uosilicic Acid 26 HDLPE/XLPE* 1.9/600 PP Viton Hastelloy Hydrogen Peroxide 50 HDLPE 1.9/600 PVC Viton Hastelloy Isopropyl Alcohol 100 HDLPE & XLPE 1.5/600 PVC EPDM 316SS Magnesium Chloride 30 HDLPE & XLPE 1.5/600 PVC EPDM Hastelloy Methyl Alcohol 100 HDLPE & XLPE 1.5/600 PVC EPDM 316SS Motor Oil 100 HDLPE & XLPE 1.9/600 316SS Viton 316SS Phosphoric Acid 85 HDLPE 1.9/600 PVC Viton 316SS Phosphoric Acid 50 HDLPE 1.9/600 PVC Viton 316SS Polymers (Deposition) XLPE 1.5/600 PVC EPDM 316SS Potable Water HDLPE 1.5/600 PVC EPDM 316SS Potassium Carbonate 50 HDLPE & XLPE 1.9/600 PVC EPDM 316SS Potassium Hydroxide Saturated HDLPE & XLPE 1.9/600 PVC EPDM 316SS Sodium Carbonate 30 HDLPE & XLPE 1.5/600 PVC EPDM Hastelloy Sodium Carbonate Saturated HDLPE & XLPE 1.9/600 PVC EPDM Hastelloy Sodium Hydroxide 50 HDLPE & XLPE 1.9/600 PVC EPDM 316SS Sodium Hypochlorite-in(Non-UV)
7 7-10 Chemical resistance (general) Stress-crack resistance1 Linear low-density polyethylene (LLDPE) Maximum service temperature Brittleness temperature2 Impact resistance2 Abrasion resistance Rigidity Cleanability Translucence Weldability (hot gas) FDA acceptance Colour (natural, un-pigmented) Liquid level Very Good Very Good 140°F/60°C -94°F/-70°C Good Good Fair Very Good observable Weldable Yes3 White No Advantages: Lightweight. Easy to clean. Corrosion resistant; no painting/maintenance. Less expensive than stainless steel or fi berglass. Applications: Storage of foodstuffs/liquids/beverages, inorganic chemicals/compounds, or organic/inorganic acids. Plating. Water treatment. Brine storage. Storage of laboratory and photographic chemicals. Not Generally Recommended for: Strong oxidizing agents, aromatic hydrocarbons, halogenated aliphatic hydrocarbons, liquefi ed petroleum gas, solvents. High-density polyethylene (HDPE) Liquid level Very Good Good 150°F/65°C -94°F/-70°C Good Good Good Very Good observable Weldable Yes3 White No "Advantages: Hard, smooth surface. Easy to clean. Less expensive than stainless steel or fi berglass. Applications: Storage of caustics or organic/inorganic acids. Metal fi nishing. Water treatment. Storage of laboratory and photographic chemicals. Plating. Not Generally Recommended for: Strong oxidizing agents, aromatic hydrocarbons, halogenated aliphatic hydrocarbons, liquefi ed petroleum gas, solvents." Cross-linked high-density polyethylene (XLPE) Very Good Excellent 150°F/65°C TANK RESIN SELECTION GUIDE . • Both operating conditions and type of chemical can decrease maximum service temperatures. • Some fi ttings of these resins are FDA–acceptable. • Regardless of resin, black–pigmented tanks are strongly recommended for outdoor use. • Continuous service temperatures in ranges above ambient can affect tanks in at least two ways: 1) the useful life of the tank may be shortened; and 2) the ability of the container to maintain its shape may decrease, perhaps resulting in distortion. -1<strong>80</strong>°F/ -118°C Excellent Good Good Very Good Liquid level observable Advantages: Excellent impact resistance. Suitable for many corrosives not handled by fi berglass-reinforced polyester (FRP). Outstanding weatherability. Applications: Storage of many corrosives, including sulfuric, hydrochloric, and hydrofl uoric acids, and sodium hydroxide. Storage of organic/inorganic chemicals/compounds. Storage of sodium hypochlorite. Storage of boiler treatment chemicals. Water/sewage treatment. Outdoor use. Not Generally Recommended for: Strong oxidizing agents, aromatic hydrocarbons, halogenated aliphatic hydrocarbons, liquefi ed petroleum gas, solvents. Oudoor use Not Weldable No Off-White No Notes: 1 XLPE is recommended for use with stress-cracking agents. 2 Brittleness temperature per ASTM test D-746. The impact resistance of most rotomolded tanks declines at freezing temperatures. XLPE tanks are well-suited for outdoor storage in winter. 3 LLDPE and HDPE tanks comply with FDA Regulation 177.1520; PVDF tanks comply with FDA Regulation 121.2593. 4 Open-top tanks should be black for outdoor use. Only tanks which are UV-stabilized may be used outdoors.
Page 1 and 2:
PLASTICS FOR TODAY’S INDUSTRY CHE
Page 3 and 4:
TABLE OF CONTENTS PVC, C, CCPV PVC,
Page 5 and 6:
1 1-2 CHEMKOR SCHEDULE 80 FITTINGS
Page 7 and 8:
1 1-4 CHEMKOR SCHEDULE 80 FITTINGS
Page 9 and 10:
1 1-6 Applications • Swimming Poo
Page 11 and 12:
1 1-8 CHEMKOR SCHEDULE 40 GRAY FITT
Page 13 and 14:
1 1-10 NOMINAL PIPE SIZE CHEMKOR SC
Page 15 and 16:
1 1-12 Part Number Nominal Pipe Siz
Page 17 and 18:
1 1-14 20º BEND 90º SOCKET ELBOW
Page 19 and 20:
1 1-16 CHEMKOR SCHEDULE 80 CPVC FIT
Page 21 and 22:
1 1-18 NOMINAL PIPE SIZE CHEMKOR SC
Page 23 and 24:
1 1-20 Part Number MM Nominal Pipe
Page 25 and 26:
1 1-22 Relative Humidity 60% or Les
Page 27 and 28:
1 1-24 PVC AND CPVC S80 EXPANSION J
Page 29 and 30:
1 1-26 NATURAL POLYPROPYLENE SCHEDU
Page 31 and 32:
1 1-28 Applications • Semi-conduc
Page 33 and 34:
1 1-30 SOCKET TEES 90° SOCKET ELBO
Page 35 and 36:
2 2-2 LXT ® SCHEDULE 80 PIPE Ultra
Page 37 and 38:
2 Notes: • IN HG refers to inches
Page 39 and 40:
2 2-6 Applications • Corrosive wa
Page 41 and 42:
2 2-8 FEATURES • Split pipe and f
Page 43 and 44:
2 Notes: • The data contained her
Page 45 and 46:
2 2-12 IPS Pipe Size Actual OD (IN)
Page 47 and 48:
2 2-14 Applications • Low-grade D
Page 49 and 50:
2 2-16 Applications • Ultra-Pure
Page 51 and 52:
2 2-18 SG 110 SOCKET FUSION MACHINE
Page 53 and 54:
2 2-20 MCELROY 824 FUSION MACHINE
Page 55 and 56:
3 3-2 +GF+ 375 TRUE UNION BALL VALV
Page 57 and 58:
3 3-4 CHEMKOR BUTTERFLY VALVES Chem
Page 59 and 60:
3 3-6 SUPER C COMPACT BALL VALVES T
Page 61 and 62:
3 3-8 CALIBRATED NEEDLE VALVES The
Page 63 and 64:
3 3-10 Notes: • The 4” valve ha
Page 65 and 66:
3 3-12 PRESSURE REGULATORS The pres
Page 67 and 68:
3 3-14 Notes: • Size range 3/8”
Page 69 and 70:
3 3-16 +GF+ PNEUMATIC ACTUATED BALL
Page 71 and 72:
3 3-18 +GF+ ELECTRIC ACTUATED BALL
Page 73 and 74:
3 3-20 +GF+ PNEUMATIC ACTUATED DIAP
Page 75 and 76:
3 3-22 HAYWARD BUS CONTROL SYSTEM S
Page 77 and 78:
3 3-24 HAYWARD EAU ELECTRIC ACTUATO
Page 79 and 80:
4 4-2 SIMONA® PVC TYPE I SHEET TEC
Page 81 and 82:
4 4-4 SIMONA® PVC TYPE II SHEET TE
Page 83 and 84:
4 4-6 SIMONA® CLEAR PVC SHEET TECH
Page 85 and 86:
4 4-8 Application • Semiconductor
Page 87 and 88:
4 4-10 Applications • Food proces
Page 89 and 90:
4 4-12 ULTRA HIGH MOLECULAR WEIGHT
Page 91 and 92:
4 4-14 Applications • Sanitary we
Page 93 and 94:
4 4-16 PVDF Natural Extruded Sheet
Page 95 and 96:
4 4-18 Diameter (Inches) PVC-CAW 15
Page 97 and 98:
4 4-20 Hollow PVC and CPVC O.D. (in
Page 99 and 100:
4 4-22 RESIN CODE DESCRIPTION BASE
Page 101 and 102:
4 4-24 PULTRUDED GRATING DURADEK®
Page 103 and 104:
4 4-26 FIBERGLASS STRUCTURAL SHAPES
Page 105 and 106:
4 4-28 FIBERGLASS STRUCTURAL SHAPES
Page 107 and 108:
4 4-30 SAFRAIL FIBERGLASS LADDERS S
Page 109 and 110:
4 4-32 ZINZER WELDING ACCESSORIES P
Page 111 and 112:
4 4-34 LARAMY ECONOMY COMPRESSOR/TO
Page 113 and 114:
4 4-36 WEGENER AIRTHERM HOT AIR WEL
Page 115 and 116:
4 4-38 FIBERGLASS THREADED ROD AND
Page 117 and 118:
AQUAMETRIX SHARK 120/240 CONTROLLER
Page 119 and 120:
Applications • Municipal Water an
Page 121 and 122:
Applications • Municipal Water an
Page 123 and 124:
IP80 SERIES PADDLE WHEEL FLOW SENSO
Page 125 and 126:
AVFM-II AREA VELOCITY FLOW LEVEL MO
Page 127 and 128:
SIGNET 8900 MULTI-PARAMETER CONTROL
Page 129 and 130:
SIGNET 2450 PRESSURE SENSOR The 245
Page 131 and 132:
FLOWLINE ECHOPOD The Flowline EchoP
Page 133 and 134:
Part # Material FC-MT-1 CPVC/POLYPR
Page 135 and 136:
Notes: • For the sensor type of p
Page 137 and 138:
Part # Pipe Size GPM LPM Flow Direc
Page 139 and 140:
F-410N MACHINED ACRYLIC TUBE FLOWME
Page 141 and 142: F-430N MACHINED ACRYLIC TUBE FLOWME
Page 143 and 144: Materials of Construction Meter Bod
Page 145 and 146: Materials of Construction Meter Bod
Page 147 and 148: Materials of Construction Pipe fi t
Page 149 and 150: Specifi cations Max. Working Pressu
Page 151 and 152: UNI-SPRAY NOZZLES Uni-Spray Nozzles
Page 153 and 154: 6 6-2 APPLICATIONS • Pumping for
Page 155 and 156: 6 Features • Leak-proof, seal-les
Page 157 and 158: 6 6-6 WEBSTER IN-TANK FILTRATION SY
Page 159 and 160: 6 6-8 APPLICATIONS • Transferring
Page 161 and 162: 6 6-10 Features • Leak-Resistant
Page 163 and 164: 6 6-12 Features • True Depth Filt
Page 165 and 166: 6 6-14 Features • Recovers 99% of
Page 167 and 168: 6 6-16 PENGUIN HF IN-TANK FILTRATIO
Page 169 and 170: 6 6-18 Options • Flanged connecti
Page 171 and 172: 6 6-20 Features • PPL or PVDF Con
Page 173 and 174: 6 6-22 Options • Stainless steel
Page 175 and 176: 6 Notes: • Other perforations may
Page 177 and 178: 6 6-26 MAZZEI INJECTORS Mazzei® In
Page 179 and 180: 6 Applications • Chemical • Was
Page 181 and 182: 6 6-30 C-1500N CHEM-FEED DIAPHRAGM
Page 183 and 184: 6 CENTRIFUGAL PUMPS Ideal type for
Page 185 and 186: 7 Notes: • Tanks must be placed o
Page 187 and 188: 7 Notes: • Tanks must be placed o
Page 189 and 190: 7 7-6 DOUBLE WALL CONTAINMENT TANKS
Page 191: 7 Notes: • Standard colour is nat
Page 195 and 196: 7 7-12 BOLTED FLANGE FITTINGS Bolte
Page 197 and 198: Applications • Swimming Pools •
Page 199 and 200: APPLICATIONS • Food & beverage di
Page 201 and 202: Applications • Food & beverage di
Page 203 and 204: Notes: • Suggested operating temp
Page 205 and 206: Notes: • Dimensions in brackets i
Page 207 and 208: Size (IN) Insert Tee (Insert x Inse
Page 209 and 210: Approx. Length (IN) Max Bundle Diam
Page 211 and 212: Male Connector (Tube x MPT) Part #
Page 213 and 214: Notes: • Available in 20ft length
Page 215 and 216: INSTADUCT® PVC VENTILATION DUCT FI
Page 217 and 218: INSTADUCT® PVC VENTILATION DUCT PI
Page 219 and 220: Branches shall not be positioned di
Page 221 and 222: Notes: • Available in 10 ft and 2
Page 223 and 224: K G a, lbs-moles/hr-ft 3 -mole frac
Page 225 and 226: MASS TRANSFER TOWER PACKING Mass Tr
Page 227 and 228: Notes: • Other plastics are avail
Page 229 and 230: APPLICATIONS • Downstream of scru
Page 231 and 232: B HF THERMOPLASTIC CENTRIFUGAL FANS
Page 233 and 234: PVC (Polyvinyl Chloride) conforming
Page 235 and 236: Handling strength, however, is not
Page 237 and 238: GUIDELINES FOR PROCESSING AND MACHI
Page 239 and 240: INSTALLATION INSTRUCTIONS SOLVENT W
Page 241 and 242: JOINING 1. Immediately upon fi nish
Page 243 and 244:
Number of Joints Per...* PIPE SIZE
Page 245 and 246:
INSTALLATION INSTRUCTIONS 3. Simult
Page 247 and 248:
INSTALLATION INSTRUCTIONS DIMENSION
Page 249 and 250:
CAUTION: THE METAL BARREL OF THE WE
Page 251 and 252:
2. A tapered plug must be inserted
Page 253 and 254:
TRENCHING The trench should be of a
Page 255 and 256:
condition. Where water fl ooding is
Page 257 and 258:
Temperature Correction Factors Oper
Page 259 and 260:
4. A check valve installed near a p
Page 261 and 262:
Normally, piping systems are design
Page 263 and 264:
Many commercial, industrial and gov
Page 265 and 266:
CHEMICAL RESISTANCE GUIDE FOR VALVE
Page 267 and 268:
PLASTICS AND ELASTOMERS AT MAXIMUM
Page 269 and 270:
CHEMICALS AND FORMULA CONCENTRATION
Page 271 and 272:
Page 273 and 274:
CONCENTRATION CHEMICALS AND FORMULA
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
COLLAPSE PRESSURE - PVC DUCT Graph
Page 289 and 290:
I. STANDARDS FOR MEASURING HEADS AN
Page 291 and 292:
HEAD - The ability of a pump to pus
Page 293 and 294:
CORRECTION FACTORS CAPACITY AND EFF
Page 295 and 296:
Symbols 60 Series Hot Tap Ph / ORP
Page 297 and 298:
Hayward EVR Electric Actuator 3-24
Page 299 and 300:
PVC And CPVC S80 Expansion Joints 1
Page 301 and 302:
TERMS PRICES All prices shown are s
Page 303 and 304:
NOTES 10 10-71
Page 305 and 306:
NOTES 10 10-73
Page 307 and 308:
HWY. 27 176 ST. (HWY 15) 149 ST. MA
show all

chemkor schedule 80 fittings - Fabco Plastics Wholesale Limited

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?