LCS III - Konica Minolta Sensing Americas, Inc.

Installation
3.5 Cell compartments and cell adapter
3.5.1 Cell compartments and adapter
10
The LCS III has two cell compartments (Figure 3). Only one
cuvette/sample cell type at a time can be used for a measurement.
Cell compartment #1
• 11 mm round cuvettes/sample cells
For measurements with 11 mm round cuvettes/sample cells in
cell compartment #1 insert the adapter Z into cell compartment
#2.
Cell compartment #2
Cell compartment #2 uses adapters to accommodate different
cuvette/sample cell types.
• 50 mm rectangular cuvettes/sample cells (can be inserted
directly into the cell compartment without using an adapter).
• Adapter Z: 10 mm square cuvettes/sample cells
Important Note: Be sure that the adapter Z is inserted proper into
the cell compartment. Press the adapter down until it snap into the
compartment.
Figure 3 Cell compartments
1 Cell compartment #1 2 Cell compartment #2