LCS III - Konica Minolta Sensing Americas, Inc.

Standard Operations
Option Description
More For further Options
Store icon To store the scan data
Time & Interval
68
Table 11 Time course setup options
To input the total time for data collection and the time interval between the collection of data
points
λ To input the wavelength setting
View Table
Scale & Units
To display readings in absorbance, transmittance or concentration. This can be changed after
sample data are collected
Scale: In the automatic scaling mode, the y-axis is automatically adjusted so that the total scan is
displayed.
The manual scaling mode allows sections of the scan to be displayed.
Units: Choice of absorbance or transmittance.
Send Data To send Data to a printer, computer or USB memory stick (Type A)
Recall Data
Call up saved measurement data, wavelength scans or time courses, see section 5.3 on
page 28.
Instrument Setup Basic data of the instrument, see section 5.2 on page 17.
Time & interval:
1. Press Time & Interval in the Options menu.
2. Input the total time and the reading time and press OK to
confirm.
Note: In total 500 measuring steps are possible. To select a total time and
a time interval that would cause this number of measurements to be
exceeded, the time interval is defined automatically and the OK key is
inactivated.