LCS III - Konica Minolta Sensing Americas, Inc.

Standard Operations
5.2.2 Sample ID
18
Each operator is able to configure his own set of color scales for
display and printout independent of the settings or configuration of
other operators.
When the operator ID is changed from A to B the color scales for
the display and printout also change.
7. Press Color Scale to display.
8. Select the color scales for the display. Scoll up or down for
more available colors.
9. Press OK to confirm.
10. The display shows the selected Operator ID.
11. Press OK to return to Instrument Setup.
12. The selected Operator ID is activated.
Note: Press Delete to remove an Operator ID from the list.
Note: Alternatively, enter or change an Operator ID in measurement mode.
In the results screen, press Options>More>Instrument Setup or if an
Operator ID is already assigned, select the Operator ID symbol
immediately in the results screen.
Use this option to enter up to 100 Sample Identification tags (up to
13 characters each) into the instrument. Sample IDs can be used to
specify the sample location or other sample specific information.