Bilingual Tech Mapping for Pulp Paper Guideline - Asosiasi Pulp ...

Gavrilescu, D. 2008. “Energy from Biomass in Pulp and
Paper” Environmental Engineering and Management
Journal, September/October 2008, Vol.7.No.5, 537-
546.
Gielen,D; Tam,C. 2006. “ Energy Use, Technologies and
CO2 Emissions in the Pulp and Paper Industry”
WBCSD, IEA, Paris, 9 October 2006.
Green, R.P., and G. Hough, 1992,. “Chemical Recovery in
The Alkaline Pulping Processes”, Third edition, Tappi
Press, Atlanta,
Elizabeth C.P.. paul N. C. 1981. Biogas production and
utilization. Ann Arbor Science publishers Inc.
Eriksson. E. Striple, H., Karlsson, P.E., 2009. Executive
Summary for Billerud Carbon Footprint, Svenska
Miljoinstitutet, Stockholm.
Hayashi, D., Krey, M., CO2 .2005. Emission Reduction
Potential of Large Scale Efficiency Energy Measures
in Heavy Industry in China, India, Brazil, Indonesia,
and South Africa, HWWI Research Paper No. 6,
Hamburg.
Johan Gullichsen, Hannu Paulapuro., 1998.,
“Papermaking Science and Technology”, Published
in cooperation with the Finnish Paper Engineers'
Association and TAPPI, Helsinki
Kilponen, L., P. Ahtila., J. Parpala., Matti Pihko., 2000,.
“Improvement of Pulp Mill Energy Efficiency in An
Integrated Pulp and Paper Mill”, Publication of the
Laboratory of Energy Economics and Power Plant
Engineering, Helsinki University of Technology.
Kocurek, M.J., 1989., “Pulp and Paper Manufacture, Vol. 5:
Alkaline Pulping”, Joint Textbook Committee of The
Paper Industry.
Halaman 114 dari 131