Bilingual Tech Mapping for Pulp Paper Guideline - Asosiasi Pulp ...

etween a few seconds to several hours. Combustion
temperature has a range 815-1650 0 C.
a-2. Fluidized Bed Incinerator
Incinerator of this type has a combustion chamber
with the fluidization system and airtight construction
meetings to keep the system at positive pressure and
prevent leakage of heat from the burning. Combustion
chamber contains a pile of sand that will be fluidized by a
blast of air that flows into the first heated by the gases of
combustion. Waste to be burned in through the conveyor
with the use of hot air those contacts along the conveyor
until the waste has continued to increase levels of drying
solids. Incoming waste bait falls on a pile of sand which is
then fluidized by hot air flow with high turbulence.
Figure 5.4 Fludized Bed Incinerator
(Http://www.google.co.id/images?um=fludized+bed+incinerator)
Page 79 of 132