Bilingual Tech Mapping for Pulp Paper Guideline - Asosiasi Pulp ...

Journal, September/October 2008, Vol.7.No.5, 537-
546.
Gielen,D; Tam,C. 2006. “ Energy Use, Technologies and
CO2 Emission in the Pulp and Paper Industry”
WBCSD, IEA, Paris, 9 October 2006.
Green, R.P., and G. Hough, 1992,. “Chemical Recovery in
The Alkaline Pulping Processes”, Third edition, Tappi
Press, Atlanta,
Hayashi, D., Krey, M., CO2 .2005. Emission Reduction
Potential of Large Scale Efficiency Energy Measures
in Heavy Industry in China, India, Brazil, Indonesia,
and South Africa, HWWI Research Paper No. 6,
Hamburg.
Johan Gullichsen, Hannu Paulapuro., 1998.,
“Papermaking Science and Technology”, Published
in cooperation with the Finnish Paper Engineers'
Association and TAPPI, Helsinki
Kilponen, L., P. Ahtila., J. Parpala., Matti Pihko., 2000,.
“Improvement of Pulp Mill Energy Efficiency in An
Integrated Pulp and Paper Mill”, Publication of the
Laboratory of Energy Economics and Power Plant
Engineering, Helsinki University of Technology.
Kocurek, M.J., 1989., “Pulp and Paper Manufacture, Vol. 5:
Alkaline Pulping”, Joint Textbook Committee of The
Paper Industry.
Kramer K.J., et al, 2009. Energy Efficiency Improvement
and Cost Saving Opportunities for the Pulp and
Paper Industry, Berkeley Lab University of California,
Berkeley.
Kraristya. 2004. Teknologi digester.
kharistya.wordpress.com
Lawrence, E.O., 2009., “Energy efficiency Improvement
and Cost Saving opportunities for the Pulp and Paper
Page 115 of 132