Bedienungsanleitung Instruction manual Mode d ... - Bartscher GmbH

� Press the „ON/OFF“-button to switch on the device, now choose setting as
required. See the cooking charts for values and set accordingly – the oven heats
up automatically. When the desired temperature is reached fill the oven with the
foods.
� Set the time using the time control.
� Then press the „Start“-button. This automatically activates the time. After the set
time has elapsed, an acoustic signal resounds and the oven switches off
automatically.
� In case you want to apply core temperature, simply insert the tip of the core
temperature sensor into the center spot of the food. Now press the button for
activation of the core temperature sensor. The yellow LED light of the core
temperature sensor flashes up in the display.
� Set the desired core temperature using the control of the core temperature
sensor thereafter.
� Adjust the steam using the steam control
� and the temperature with the temperature control.
� Press the „Start“-button to start the cooking process. When the set core
temperature is reached the oven automatically switches off. In case you want to
use the steamer for á La Carte via the lunch or dinner service, we recommend
you start the oven and set a standard temperature, e.g. 130°C, and let the oven
operate.
� This allows for heating up the device easy and quickly to the desired temperature
by adjusting the temperature control. If you do not activate the time setting, the
oven automatically continues operation at the chosen temperature.
- 49 -