Processor Local Bus Functional Model Toolkit User's Manual

• Error 2.11.4
An error message is issued when a slave asserts is Sln_wrDAck after it has already been asserted
for the last write data transfer of a burst write.
• Error 2.11.5
An error message is issued if more than one Sl_wrDAck is asserted during the same clock cycle.
• Error 2.11.6
An error message is asserted when this signal is asserted for a transfer that is outside of the
slave’s assigned address space.
• Error 2.11.7
An error message is asserted when wrcomp is asserted for a burst transfer before the last wrdack
of the burst is received.
8.7.12 Sln_wrComp
The following error messages are issued for this signal:
• Error 2.12.1
An error message is issued when Sln_wrComp is asserted and PLB_wrBurst is active during the
data phase of a burst write transfer.
• Error 2.12.2
An error message is issued when Sln_wrComp is active outside of allowed window i.e. from the
assertion of Sln_addrAck to the assertion of Sln_wrComp.
• Error 2.12.3
An error message is issued when more than one slave asserts Sln_wrComp in the same clock.
8.7.13 Sln_wrBTerm
The following error messages are issued for this signal:
• Error 2.13.1
An error message is issued when Sln_wrBTerm is active outside of allowed window from the
assertion of Sln_addrAck to the assertion of Sln_wrComp.
• Warning 2.13.2
A warning message is issued when Sln_wrBTerm is not asserted during a guarded burst transfer
that crosses a 1k address boundary.
• Note 2.13.3
A note message is issued if this signal is asserted pre-maturely during a fixed length burst transfer.
This means the wrbterm is asserted when there is more than one dack required to meet the
number of expected dacks.
8.7.14 Sln_rdDBus
The following error messages are issued for this signal:
84 Processor Local Bus Functional Model Toolkit Version 4.9.2