COMAND - Mercedes Benz USA

130 Satellite Radio
Audio
SatRadio Menu
X On the submenu bar rotate ymz or slide
omp until SatRadio is highlighted.
X Press n.
The SatRadio menu appears.
Entering a Channel Number Directly
X Select SatRadio£Enter Channel in the
SatRadio menu.
An input dialog appears.
or
X Press l on the control unit.
X To enter a channel: Press corresponding
number buttons on the control unit.
COMAND will tune to the channel entered.
i You can only select numbers that are
currently permissible.
Selecting a Channel from the SatRadio
Channel List
X Select SatRadio£Channel List in the
SatRadio menu.
The channel list appears.
X To select a channel: Rotate ymz or slide
qmr
X To tune to the selected channel:
Press n.
Memory Functions
i There are 10 presets available.
You can use the following functions:
RStoring channels
RSelecting a channel from the Satellite
preset memory
Storing Channels
X Press n if the main area is highlighted.
or
X Select Presets on the SatRadio submenu
bar.
In both cases, the channel memory will
appear. The dot R in front of a preset
indicates that the currently tuned channel
is stored there.
Channel Memory
X To select a preset: Rotate ymz or slide
qmr.
X To store a channel to a selected preset:
Press and hold n until a signal tone
sounds.
or
X Press and hold a number key, e.g. 4, until
a signal tone sounds.
The channel is stored.
Selecting a Channel from the Memory List
X To call up the channel list: In the
submenu rotate ymz or slide omp until
Presets is highlighted.
The presets list appears.
X To select a channel: Rotate ymz or slide
qmr.
X To tune to the selected channel: