Config Panel (2.40) - Guntermann und Drunck GmbH

Marking the messages from a critical device as read
Monitoring functions
Many messages require immediate actions by the administrator. Other messages
(the break-down of the redundant power supply, for example), however, point to
possibly uncritical conditions.
In such a case, all peculiar values of a device can be marked as read, which causes
the following:
A device whose deviating values have been marked as read shows no blinking status
bar.
The cells, info dialogs and monitoring windows of all devices, which have been
“read”, are highlighted in yellow.
If a monitoring group contains critical values, which have been marked as read,
the column displays Error. In addition, the column is highlighted in yellow.
NOTE: The system only highlights values that have been deviating from the normal
operating values at the time the function has been executed. The web application
shows if, during operation, another monitoring value of such a device deviates from
the normal operating values.
How to mark the Monitoring messages of a device as read:
1. Use the tree view to click the folders System monitoring > Critical Devices.
2. Right-click the desired device. Now, click the Acknowledge entry of the context menu.
G&D DL-MUX · 27