Config Panel (2.40) - Guntermann und Drunck GmbH

Administering monitoring sets
Monitoring functions
A monitoring set defines the individual values and the groups to be displayed in a
subfolder of the KVM combinations branch or a device-specific branch:
Figure 4: Status of the individual Status value and three groups of a monitoring set
The Config Panel web application already provides several preconfigured monitoring
groups. Those groups can neither be edited nor deleted, but they can be duplicated
and individually adjusted to your wishes.
It is also possible to create and configure a new group.
IMPORTANT: The created monitoring sets are only displayed in the branch in
which they have been created.
If a monitoring set has been created in a device-specific branch, it is no longer displayed
in the KVM combinations branch!
Adding a monitoring set
How to add a monitoring set:
1. Right-click the topmost level of a device-specific branch (KVM extenders, for
example) or the KVM combinations branch in the tree view.
2. Click the Monitoring set entry in the context menu.
3. Click New.
4. Enter the name and an optional comment for the new set.
5. Click OK to create the set.
G&D DL-MUX · 31