Config Panel (2.40) - Guntermann und Drunck GmbH
Config Panel (2.40) - Guntermann und Drunck GmbH
Config Panel (2.40) - Guntermann und Drunck GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Device monitoring via SNMP<br />
How to delete an existing trap:<br />
1. Use the tree view to click on KVM switches > [All switches].<br />
2. Right-click the device to be configured. Now, click the <strong>Config</strong>uration entry in the<br />
context menu.<br />
3. Click the tabs Network > SNMP trap.<br />
4. Select the receiver to be deleted and click Delete.<br />
5. Click OK to save your settings and to leave the window.<br />
How to generate a test event:<br />
1. Use the tree view to click on KVM switches > [All switches].<br />
2. Right-click the device to be configured. Now, click the <strong>Config</strong>uration entry in the<br />
context menu.<br />
3. Click the tabs Network > SNMP trap.<br />
4. Click on Generate test event.<br />
5. Click OK to save your settings and to leave the window.<br />
NOTE: If properly configured, the Trap message is displayed within your Network<br />
Management System.<br />
G&D DL-MUX · 39