Config Panel (2.40) - Guntermann und Drunck GmbH

Network functions of the devices
User authentication against directory services
In in-house networks, the user accounts of different users are often centrally administered
by directory services. The device can access these directory services and
authorise users against the directory service.
How to configure the user account authentication:
NOTE: If no directory service is being applied, the user accounts are administered by
the device.
1. Use the tree view to click on KVM switches > [All switches].
2. Right-click the device to be configured. Now, click the Configuration entry in the
context menu.
3. Click the Network > Authentication tabs and enter the following data:
Auth. Server: Select the Local option if the user administration is to be carried
out by the KVM system.
If a particular directory service is to be applied, select the
respective entry from the pull-down menu:
LDAP
Active Directory
Radius
TACACS+
ADVICE: After the directory service has been selected, collect the settings of
the directory service server in the Server settings.
Fallback: Activate this option if the local user administration of the
KVM system is to be applied in case the directory service is
temporarily not available.
4. Click OK to close the window.
G&D DL-MUX · 23