Config Panel (2.40) - Guntermann und Drunck GmbH
Config Panel (2.40) - Guntermann und Drunck GmbH
Config Panel (2.40) - Guntermann und Drunck GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Config</strong>uration settings of KVM switches<br />
Support for special keyboards<br />
The KVM switch supports the special functions of special keyboards such as<br />
PixelPower Clarity (blue) and SKIDATA1.<br />
Activate their support to apply such keyboards.<br />
How to (de)activate the support for special keyboards:<br />
1. Use the tree view to click on KVM switches > [All switches].<br />
2. Right-click the KVM switch and click the <strong>Config</strong>uration entry in the context menu.<br />
3. Click the General tab.<br />
4. Use the Enhanced Keyboard Type field to select between the following options:<br />
PixelPower Blue: activate support for PixelPower Blue keyboard<br />
SKIDATA1: activate support for SKIDATA1 keyboard<br />
Standard: deactivate support for special keyboards<br />
5. Click OK to save your changes.<br />
Changing the scancode set of a PS/2 keyboard<br />
If a key is pressed on the PS/2 keyboard, the keyboard processor sends a data packet<br />
called scancode. The two common scancode sets (sets 2 and 3) contain different<br />
scancodes.<br />
In the standard configuration, the KVM switch interprets all PS/2 keyboard inputs<br />
with the scancode set 2.<br />
If the pipe (“|”) cannot be input or if the arrow keys of the keyboard do not function<br />
as expected, it is recommended to switch to scancode set 3.<br />
How to change the settings of the scancode set:<br />
1. Use the tree view to click on KVM switches > [All switches].<br />
2. Right-click the KVM switch and click the <strong>Config</strong>uration entry in the context menu.<br />
3. Click the General tab.<br />
4. Use the Scancode Set field to select between the following options:<br />
Set 2: activate scancode set 2 for PS/2 keyboard inputs<br />
Set 3: activate scancode set 2 for PS/2 keyboard inputs<br />
5. Click OK to save your changes.<br />
6. Restart the KVM switch.<br />
NOTE: After the restart, the keyboard is being initialised and the selected scancode<br />
set is applied.<br />
72 · G&D DL-MUX