Config Panel (2.40) - Guntermann und Drunck GmbH

More documents

Recommendations

Info

Advanced functions of the KVM system Advanced functions of the KVM system Temporarily (de)activating SNMP traps (Maintenance mode) By activating the maintenance mode the user is enabled to deactivate SNMP traps (see page 37), for example, for devices which are currently occupied for reasons of maintenance. The status messages are again displayed after the maintenance mode has been deactivated. (De)activating the maintenance mode How to (de)activate a device’s maintenance mode: 1. Use the tree view to click on KVM switches > [All switches]. 2. Right-click the device and click on Maintenance > On or Maintenance > Off in the context menu. Viewing a list of devices in maintenance mode How to display the list of devices in maintenance mode: 1. Use the tree view to click in the folders System monitoring > Maintenance. The main view lists the respective devices. ADVICE: In all views, the devices in the Maintenance mode are displayed in yellow. 60 · G&D DL-MUX
Advanced functions of the KVM system Identifying a device by activating the Identification LED Some devices provide an Identification LED on the front panel. Use the web application to switch the device LEDs on or off in order to identify the devices in a rack, for example. How to (de)activate the Identification LED of a device: 1. Use the tree view to click on KVM switches > [All switches]. 2. Right-click the device and click on Identification LED > On or Identification LED > Off in the context menu. Saving and restoring the data of the KVM system All system settings – except the network settings of the devices – can be saved with this backup function. The saved data can be restored by using the restore function. NOTE: The paragraph Backup and restore function on page 13 describes how to save and restore the network settings of a device of the KVM system. How to save the system settings of the KVM system: 1. Use the tree view to click on System. 2. Right-click on System in the display range and click on Backup/Restore in the context menu. 3. Click Backup. 4. Optional: Enter a Comment and/or a Password to secure the backup file. 5. Click OK. 6. Use the file window to define the location and the File name of the backup file. 7. Click Save. 8. Click OK to leave the window. How to restore the system settings of the KVM system: 1. Use the tree view to click on System. 2. Right-click on System in the display range and click on Backup/Restore in the context menu. 3. Enter the location and the name of the backup file in the Path field. ADVICE: Use the file button to select the name and the location of the backup file via the file window. 4. Optional: Click Check file to check the validation of the backup file. G&D DL-MUX · 61
Page 1 and 2:
Guntermann & Drunck GmbH www.gdsys.
Page 3 and 4:
Contents Chapter 1: Basic functions
Page 5 and 6:
Contents Administering user account
Page 7 and 8:
1 Basic functions The Config Panel
Page 9 and 10:
Initial configuration of the networ
Page 11 and 12:
User login against the web applicat
Page 13 and 14:
Frequently used buttons Getting sta
Page 15 and 16: Basic configuration of the web appl
Page 17 and 18: Basic configuration of the web appl
Page 19 and 20: Backup and restore function Basic c
Page 21 and 22: Network functions of the devices Ne
Page 23 and 24: Network functions of the devices 5.
Page 25 and 26: NTP server Network functions of the
Page 27 and 28: Sending syslog messages to a server
Page 29 and 30: Network functions of the devices Us
Page 31 and 32: Viewing monitoring values Monitorin
Page 33 and 34: Marking the messages from a critica
Page 35 and 36: Changing name and/or comment of a m
Page 37 and 38: Administering monitoring sets Monit
Page 39 and 40: Selecting a monitoring set in the f
Page 41 and 42: Device monitoring via SNMP Device m
Page 43 and 44: Configuring SNMP traps Device monit
Page 45 and 46: Device monitoring via SNMP How to d
Page 47 and 48: Viewing a logbook entry in details
Page 49 and 50: Deleting a logbook entry Logbook Ho
Page 51 and 52: Copying the logbook entries Logbook
Page 53 and 54: Users and Groups Efficient rights a
Page 55 and 56: Creating a new user account Users a
Page 57 and 58: Changing the user account rights Us
Page 59 and 60: Creating a new user group The user
Page 61 and 62: (De)activating a user group Users a
Page 63 and 64: The »KVM combinations« folder The
Page 65: Renaming a folder The »KVM combina
Page 69 and 70: Overview of the monitoring values O
Page 71 and 72: 2 KVM Switches The KVM switches ent
Page 73 and 74: Configuration settings of KVM switc
Page 75 and 76: (De)activating the switching Config
Page 77 and 78: Configuration settings of KVM switc
Page 79 and 80: Advanced functions for KVM switches
Page 81 and 82: Advanced functions for KVM switches
Page 83 and 84: Viewing information on the connecti
Page 85 and 86: NOTES
Page 87 and 88: NOTES
show all

Config Panel (2.40) - Guntermann und Drunck GmbH

Create successful ePaper yourself

Delete template?

Save as template?