Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

LAYOUT
Purpose Statement for handling of layout files.
Chapter —Program Instructions
Syntax LAYOUT[F,] ,,|,|
F, optionally allows use of data and error files instead of arrays
is the layout file.
is the logotype name file.
| is the data array () or data file ().
| is the error array () or error file ().
Remarks : Layout file format sorted in ascending order (Records 1-n, 52 bytes each)
Input: H = hex digit, D = Numeric digit, C = Alpha character
Byte # Parameter Layout Type Input Notes
0-1 Element number HH
2 Layout type C
A = Logotype by name
B = Bar code
C = Text
E = Bar code extended field Note 1
H = Barfont on/off
J = Baradjust (corresponds to BARADJUST stmt)
L = Logotype by number
S = Line
X = Box
3 Direction A,B,C,L,S,or X D
Barfont on/off (0=off; 1=on) H D
Security E D
4 Alignment A,B,C,L,S,X D
Aspect height ratio E D
5-8 X-position A,B,C,L,S,or X DDDD
Aspect width ratio E D
Baradjust left J DDDD
9-12 Y-position A,B,C,L,S,or X DDDD
Rows in bar code E DD
Baradjust right J DDDD
13-22 Font name C C 1 -C 10 Note 2
Logotype name A C 1 -C 10
Bar code name B C 1 -C 10
Barfont name H C 1 -C 10
Line length S DDDD
Box width X DDDD
Columns in bar code E DD Byte 13-14
Truncate according to code spec's E D Byte 15
23-42 Fixed text or alphanumeric data B or C C 1 -C 20
Fixed numeric data B D 1 -D 20
Logotype number L DD
Box height X DDDD
Line thickness S DDDD
43-44 No of char. to print (of byte 23-42) B or C DD
45-46 Image type (I = inverse image) A,C, or L C
Bar code ratio (wide/narrow bars) B DD
47 Vertical magnification A,C, or L D or C Note 3
Bar code magnification B D or C Note 3
48 Horizontal magnification A,C, or L D
49-51 Bar code height B DDD
Line thickness X DDD
Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual 1 1