Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

Chapter —Bar Codes
RSS-14 Truncated
Separate Instructions
BARTYPE: "RSS14T"
BARRATIO: Not applicable.
BARMAG: Specifies the x-dimension width in dots of the most narrow element for
both the linear bar code and the 2D code. Default: 2.
BARHEIGHT: Specifies the height of the linear bar code1 . Default: 100.
BARFONT ON/
OFF:
No restriction.
BARSET Instruction
BARSET Instruction
[#] Optionally specifies the start parameter in
the syntax
Bar code type "RSS14T"
Placeholder Value insignificant.
Placeholder Value insignificant.
Barmag/Enlargement See BARMAG.
Barheight See BARHEIGHT.
Placeholder Value insignificant.
Placeholder Value insignificant.
Placeholder Value insignificant.
Not applicable
Not applicable
Not applicable
Input Data
No. of characters: 13 digits If less than 13 digits are entered,
leading zeros will automatically be
added so the string will be 13 digits
long.
1 /. There are restrictions in the standard for the minimum size for each RSS bar code, even if it is possible to print an RSS
bar code in any height. The height should relate to the magnification. RSS Stacked differs, because the bar code rows do
not have the same height. BARHEIGHT or BARSET specifies the height of the lower row and height of the
upper row is automatically calculated from the height of the lower row.
For RSS-14 Truncated, the width is 96X and the minimum height is 13X, where X is the width of the most narrow element
as specified by BARMAG or BARSET.
Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual