Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

Chapter —Bar Codes
EAN-13 Composite Symbol
There is no linkage flag in the EAN-13 symbol to indicate the presence of
an associated 2D Composite Component. EAN-13 linear component may
only be linked to four-column CC-A or CC-B components.
EAN-8 Composite Symbol
There is no linkage flag in the EAN-8 symbol to indicate the presence of
an associated 2D Composite Component. EAN-8 linear component may
only be linked to three-column CC-A or CC-B components.
UPC-E Composite Symbol
There is no linkage flag in the UPC-E symbol to indicate the presence of
an associated 2D Composite Component. UPC-E linear component may
only be linked to two-column CC-A or CC-B components.
UCC/EAN-128 Composite Symbol
UCC/EAN-128 is a Code 128 with a FNC1 character in the first position
after the start character. When UCC/EAN-128 is the linear component
of an EAN.UCC Composite Symbol, the bar code shall have a Code Set
character (see the table below) as a linkage flag in the last symbol character
position before the check character. The printer will add the linkage flag
automatically.
Code Set characters to be used for linkage flag
Active Code
Set
Link flag character for CC-A
or CC-B
A CODE B CODE C
B CODE C CODE A
C CODE A CODE B
Link flag character for CC-C
UCC/EAN-128 Composite Symbol may be combined with any of the 2D
bar code components created for the EAN.UCC Composite Symbology.
The choice between using CC-A/B or CC-C is made by the user.
This table describes how an UCC/EAN-128 Composite symbol is built.
Start char. FNC1 Data Link flag
char.
Added by
the printer.
Added by
the printer.
The data is
added by
the user. If it
is necessary
to change
Code Set the
printer add
Code- or
Shift-characters
to
change
subset.
Added by
the printer.
Check digit Stop char.
Calculated
and added
by the
printer.
Added by
the printer.
It is possible to choose to filter out spaces, parentheses, and Carriage
Returns for the bar code data and display them in the human readable
field. Carriage return makes it possible to display the human readable field
in multiple rows.
Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual 7