02.10.2012 Views

Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Chapter —Bar Codes<br />

MicroPDF is a multi-row symbology based on PDF417. A limited set of<br />

symbol sizes is available where each size has a fixed level of error correction.<br />

CC-A<br />

CC-A is a variant of MicroPDF417, and the smallest of the 2D Composite<br />

Components. CC-A can encode up to 56 digits and has 3 to12 rows and 2<br />

to 4 columns. CC-A is a variant of MicroPDF417 with a unique combination<br />

of row address patterns.<br />

CC-B<br />

CC-B is a variant of MicroPDF417 symbol uniquely identified by the<br />

codeword 920 as the first codeword in the symbol. Encoding systems<br />

select CC-B when the data to be encoded exceeds the capacity for CC-A.<br />

CC-B can encode up to 338 digits and has from 10 to 44 rows and 2 to 4<br />

columns.<br />

CC-C<br />

CC-C bar code is the same as a PDF417 except for:<br />

• Reserved code word: CC-C has codeword 920 in the second symbol<br />

character position (immediately following the Symbol Length Descriptor.)<br />

• High-level data encodation: After the first data codeword 920 the<br />

second data codeword is a latch to Byte Compaction mode.<br />

• Structure Append: Is not used in CC-C<br />

• Reader initialization: Codeword 921 do not appear in CC-C.<br />

• Quiet zones: No quiet zones are required above and under the bar code.<br />

• <strong>Reference</strong> decode algorithm: An incorrect composite 2D bar code.<br />

• Error correction: CC-C meets or exceeds the minimum error correction<br />

level recommended for PDF417.<br />

• Symbology identifiers: Special for CC-C<br />

• Composite Component escape mechanism: After the first Byte mode<br />

codeword 901 or 924 in the 2D Composite Component, if another<br />

codeword greater than 899 occurs, the composite “symbol” is logical<br />

terminated at that point. The remaining codewords are encoded and<br />

decoded according to specials rules.<br />

A CC-C is only a part of an EAN.UCC Composite symbol with an UCC/<br />

EAN-128. The number of columns in the bar codes are possible to set (up<br />

to 30 columns). The number of rows are as many as necessary to represent<br />

the 2D data with the chosen number of columns.<br />

Example<br />

This example corresponds to the illustration at the start of this chapter.<br />

BARFONT ON<br />

BARSET "EAN128_CCC",1,1,5,100,0,0,0,0,0,1<br />

PRBAR "(01)93812345678901|(10)ABCD123456(410)389<br />

8765432108"<br />

PRINTFEED<br />

<strong>Intermec</strong> Fingerprint <strong>v8.70.0</strong>/v10.0.0 Programmer´s <strong>Reference</strong> <strong>Manual</strong> 81

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!