Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual
Chapter —Bar Codes
1 /. There are restrictions in the standard for the minimum size for each RSS bar code, even if it is possible to print an RSS
bar code in any height. The height should relate to the magnification. RSS Stacked differs, because the bar code rows do
not have the same height. BARHEIGHT or BARSET specifies the height of the lower row and height of the
upper row is automatically calculated from the height of the lower row.
For RSS-14S, the width is 50X and the minimum height is 13X (upper 5X + lower 7X + separator 1X min.), where X is
the width of the most narrow element as specified by BARMAG or BARSET.
Example Example of an RSS14S bar code with the following characteristics and
with recommended minimum height selected:
Place holder (nexp 1 ): 1
Place holder (nexp 2 ): 1
Most narrow element width in dots: 3
Height in dots: 21
Place holder (nexp 5 ): 1
Character exclusion (nexp 6 ): 1
Separator pattern row height (nexp 7 ): 4
Height of rows in 2D bar code (nexp 8 ): 4
Separator character (nexp 9 ): 124
2D human readables (nexp 10 ): 1
Data: 1234567890123|987654321
BARSET "RSS14S",1,1,3,21,1,1,4,4,124,1
PRBAR "1234567890123|987654321"