Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

QR Code
BARSET Instruction
Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual
Chapter —Bar Codes
BARSET Instruction
[#] Optionally specifies the start parameter in
the syntax
Bar code type "QRCODE"
Not applicable
Not applicable
Element size in dots 1-127 (default 2)
QR Code model 1 (default) or 2 (recommended)
Security level 1-4
1=L
2=M (default)
3=Q
4=H
(Mask pattern selection) Reserved for future use
Not applicable
Not applicable
Not applicable
Not applicable
Remarks Input data Capacity (Model 1)
Security
level
Numeric Alphanumeric 8-bit byte data Kanji
L 1176 707 486 299
M 877 531 365 225
Q 738 447 307 189
H 498 302 207 127
Input data Capacity (Model 2)
Security
level
Numeric Alphanumeric 8-bit byte data Kanji
L 7089 4296 2953 1817
M 5596 3391 2331 1435
Q 3993 2420 1663 1024
H 3057 1852 1273 784
The unit is number of characters. Mixed mode is supported for all combinations except
for combinations containing bot 8-bit byte and Kanji data. The type of data is set automatically
by the implementation based on the input characters.
Error Correction Levels
L 7%
M 15%
Q 25%
H 30%