Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

Chapter —Bar Codes
RSS-14 Expanded (Composite)
Separate Instructions
BARTYPE: "RSS14E"
BARRATIO: Not applicable.
BARMAG: Specifies the x-dimension width in dots of the most narrow element for
both the linear bar code and the 2D code. Default: 2.
BARHEIGHT: Specifies the height of the linear bar code1 . Default: 100.
BARFONT ON/
OFF:
No restriction.
BARSET Instruction
BARSET Instruction
[#] Optionally specifies the start parameter in
the syntax
Bar code type "RSS14E"
1 Placeholder Value insignificant. 0 is not allowed.
2 Placeholder Value insignificant. 0 is not allowed.
3 Barmag/Enlargement See BARMAG.
4 Barheight See BARHEIGHT.
5 Placeholder Value insignificant.
Character exclusion in bar code (does not
affect human readables)
0: The bar code will not include any
of the characters space, (, ), and carriage
return [CHR$(13)] but they will
be printed in the human readable field.
Carriage returns make it possible to print
human readable in multiple rows.
1 (default): The bar code and the human
readable field will include exactly the
same data.
7 Height of separator pattern row in dots Value must be 1-2 × BARMAG. For
example, if BARMAG = 5, 5-10 is OK
8 Height of each row in 2D bar code in dots Default: 0 (= 3 × BARMAG)
9 Separator character between data to linear
bar code and 2D bar code
ASCII 2-255 dec. Default: ASCII 124
dec. ASCII 48-57 dec. not allowed.
10 2D human readables On/Off 0 = No human readable 2D field.
1 = Print human readable 2D field.
1 /. There are restrictions in the standard for the minimum size for each RSS bar code, even if it is possible to print an RSS
bar code in any height. The height should relate to the magnification. RSS Stacked differs, because the bar code rows do
not have the same height. BARHEIGHT or BARSET specifies the height of the lower row and height of the
upper row is automatically calculated from the height of the lower row.
For RSS-14E, the width is depending on input and the minimum height is 33X, where X is the width of the most
narrow element as specified by BARMAG or BARSET.
00 Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual