Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

RSS-14 Expanded
Separate Instructions
Chapter —Bar Codes
BARTYPE: "RSS14E"
BARRATIO: Not applicable.
BARMAG: Specifies the x-dimension width in dots of the most narrow element for
both the linear bar code and the 2D code. Default: 2.
BARHEIGHT: Specifies the height of the linear bar code1 . Default: 100.
BARFONT ON/
OFF:
No restriction.
BARSET Instruction
BARSET Instruction
[#] Optionally specifies the start parameter in
the syntax
Bar code type "RSS14E"
Placeholder Value insignificant.
Placeholder Value insignificant.
Barmag/Enlargement See BARMAG.
Barheight See BARHEIGHT.
Placeholder Value insignificant.
Placeholder Value insignificant.
Placeholder Value insignificant.
Not applicable
Not applicable
Not applicable
Input Data
No. of characters: Max. 71 numeric or 41 alphanumeric
characters
Allowed characters: 0-9 A-Z a-z ! "
% & ' ( ) * + , - . / : ; < = > ? _ space
FNC1 [CHR$(128)]
1 /. There are restrictions in the standard for the minimum size for each RSS bar code, even if it is possible to print an RSS
bar code in any height. The height should relate to the magnification. RSS Stacked differs, because the bar code rows do
not have the same height. BARHEIGHT or BARSET specifies the height of the lower row and height of the
upper row is automatically calculated from the height of the lower row.
For RSS-14E, the width is depending on input and the minimum height is 33X, where X is the width of the most
narrow element as specified by BARMAG or BARSET.
Remarks The RSS-14 Expanded can be used for intelligent encoding of the input
data. They can be created with different encoding methods and compressed
data fields. To understand how to create intelligent bar codes with RSS-
14E, see Chapter 7 “Symbol Requirements for RSS Expanded” in the AIM
specification: International Symbology Specification Reduced Space Symbology
(RSS), AIM Inc. ITS/99-0012, Version 1.0 1999-10-29.
Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual 71