Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

REWINDVOID
Chapter —Program Instructions
Purpose Function to rewind VOID labels with the liner in EasyCoder PX-series
printers with RFID enabled.
Syntax REWINDVOID OFF|ON[]
specifies the number of dots the paper will be fed before the
internal rewind motor will start pulling liner. Default:100. Maximum
value is label length.
Remarks EasyCoder PX-series printers may have two separate motors, one for
feeding paper and one for rewinding liner. This function causes a VOID
tag/label to be rewound with the liner paper when using the printer in selfstrip
mode, avoiding a label being from being dispensed (i.e. to an applicator).
The value for must be tested for each specific media and label
length.
Example REWINDVOID ON 200
Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual 1