Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

Chapter —Program Instructions
PRINT KEY ON/OFF
Purpose Statement for enabling or disabling printing of a label by pressing the Print
key.
Syntax PRINT KEY ON|OFF
Default: PRINT KEY OFF
Remarks In the Immediate Mode and in the Intermec Direct Protocol, the
key can be enabled to issue printing commands, corresponding to PRINT-
FEED statements. This implies that each time the key is pressed,
one single label, ticket, tag, or portion of continuous stock will be printed
and fed out.
Note that this statement cannot be entered in the Programming Mode (use
KEY ON and ON KEY GOSUB statements instead).
Example This example shows how the Print key is enabled in the Intermec Direct
Protocol and a label is printed (abbreviated instructions are used whenever
available):
INPUT ON ↵
PRINT KEY ON ↵
PP 100,100 ↵
FT "Swiss 721 BT" ↵
PT "TEST LABEL" ↵
[Press the key]
INPUT OFF ↵
0 Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual