Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

Chapter —Program Instructions
TAGFORMAT
Purpose Statement specifying the format of the data to be read from or written to
an RFID tag.
Syntax TAGFORMAT
is the format of the data. Available formats are:
"ASCII" 8-bit ASCII string.
"HEX" Hexadecimal string. Values 0-9 and a-f allowed. Hex
characters must be entered in pairs. Default.
"NUM" Integer. 0 to 2147483647 allowed. Always uses 4 bytes
to represent data, unless a field smaller has been defined,
and the number fits in that field. Not allowed in Class1 tag.
EPCGlobal tag formats:
"SGTIN-64" "Filter","Company Prefix",Item Reference",Serial Number"
"SGTIN-96" "Filter","Company Prefix",Item Reference",Serial Number"
"SSCC-64" "Filter","Company Prefix","Serial Reference"
"SSCC-96" "Filter","Company Prefix","Serial Reference"
"SGLN-64" "Filter","Company Prefix","Location Reference","Serial
Number"
"SGLN-96" "Filter","Company Prefix","Location Reference","Serial
Number"
"GRAI-64" "Filter","Company Prefix","Asset Type","Serial Number"
"GRAI-96" "Filter","Company Prefix","Asset Type","Serial Number"
"GIAI-64" "Filter","Company Prefix","Individual Asset Reference"
"GIAI-96" "Filter","Company Prefix","Individual Asset Reference"
"GID-96" "General Manager Number","Object Class","Serial Number"
"USDOD-64" "Filter","Government Managed Identifier","Serial Number"
"USDOD-96" "Filter","Government Managed Identifier","Serial Number"
"EPC-HEX64" Hex values for all bits on a 64-bit tag's memory area.
"EPC-HEX96" Hex values for all bits on a 96-bit tag's memory area.
"EPC-URN" Uniform Resource Name string. Standardized format for
entry of EPC identity.
Remarks The TAGFORMAT command is used to specify the format of the data
to be read from or written to a tag with a subsequent TAGREAD or
TAGWRITE command. The format applies to the field defined by the
most recent TAGFIELD command.
More information on tag formats can be found in Chapter 6.
TAGFORMAT is reset to its default by a TAGFIELD command. Related
commands are TAGFIELD, TAGREAD and TAGWRITE.
Examples 10 FILTER$ = "3"
20 PREFIX$ = "0614141"
30 ITEM$ = "100734"
40 SERIAL$ = "2"
50 TAGFIELD "@EPC"
60 TAGFORMAT "SGTIN-96"
70 TAGWRITE FILTER$, PREFIX$, ITEM$, SERIAL$
7 Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual